UNSOLVED

JD99

updated

19 years ago

J

JD99

15 Posts

0

9241

January 13th, 2008 07:00

XPS 420 Second Hard Drive conflict with Premiere Elements

I wanted to share my experience adding an additional drive to my XPS 420, the conflict with Adobe Premiere Elements, and my solution (actually, work-around).

My XPS-420 came with a 750GB HD.  I purchased an additional 500GB SATA Western Digital hard drive locally.  I connected it to an available SATA slot (The manual suggests that SATA 0 and 1 should be hard drives, but support sez that does not matter). I put the new drive in the first available slot (2) (the system came with two DVD optical drives connected to SATA 0 & 1).

Everything went peachy – the drive was found, was able to access it, etc, until I installed Adobe Premiere Elements (Didn't come insatlled in my system for some reason).  The program installed great (no errors), but when I tried to run it, it would hang!  I installed the online patch from the Dell downloads & drivers section (you need this to avoid other hang issues), but still no joy!  After hours on the phone with Dell support, I was told that they could not help me anymore because I purchased the hard drive locally.  I continued to troubleshoot the problem by returning the hard drive and purchasing a different make and model (Seagate 500GB).  I installed that, and found that it exhibited the same problem.  At this point I believe that I could rule out the hard drive. To make a long story short, I eventually found out that the problem was because I put a device into SATA slot 2.  This only occured when I had two SATA hard drives in the system. If I left SATA slot 2 empty, Premiere Elements came up fine.  Problem solved (after days of troubleshooting).

Ok, you say that it probably was a mother board?  Nope!  Dell sent me another motherboard (for another problem), and I received a replacement computer (still another problem).  All exhibit the same issue.  If you put an additional 500GB hard drive into the system, and a device is connected to SATA slot 2, then Adobe Premiere Elements will hang!  Don’t know why, but it does! I think the problem is probably universal!  Dell – I’d love to know why!!!!

I did notice that SATA slot 2 has a different color connector.  Maybe there is something special about this slot?  Maybe it’s a bug in Premiere? Maybe a motherboard design issue?  One thing for certain is that many other people will probably experience this issue.  Dell should troubleshoot this, or at least place it in the 420 FAQ.  The biggest issue is that resolution of this problem falls between Dell, the hard drive manufactures, and Adobe.  Getting support is very difficult.  More of a work-around than a solution, but hopefully it will save someone the days of troubleshooting that I experienced!



Message Edited by JD99 on 01-13-2008 03:09 AM

Message Edited by JD99 on 01-13-2008 03:09 AM
  • packerFan07

    705 Posts

    325

    0

    Posted January 13th, 2008 11:00

    nice job debugging, but if you have 2 opticals and one hdd wouldn't 0,1, and 2 be already used leaving you with sata 3 has you first free slot. just trying to clarify....
     
    I added my hdd to sata 3 (first open) and that works  - I do recall one of the sata ports being a different color as you mention, but thougt nothing of it. One last question, at what point did elements hang for you?
  • Davet50

    6 Operator

    •

    14442 Posts

    325

    0

    Posted January 13th, 2008 14:00

    Curious from your manual it states:
     
    NOTE: It is recommended that you connect the hard drive to the connector labeled SATA0 on the system board. Connect additional hard drives to connectors labeled SATA1 and SATA2. Connect the CD/DVD drives to connectors adjacent to where the hard drive is connected.
     
     
  • JD99

    15 Posts

    325

    0

    Posted January 13th, 2008 18:00

    Davet50,
     
    Yes, the manual does say that.  Too bad Dell production does not read the manual because that is not the way it came.  I had the motherboard replaced by onsite service, and the hooked it up with the two optical drives in slots 0 and 1. I did read the manual and tried connecting the hard drives the way the manual suggested (and in any every other combination under the sun) but that did not help.  I’m not sure why the manual recommends the configuration it does (and neither does tech support).  Maybe someone else knows; but that was not the answer. The white connector on SATA 2 does have me curious.  It has been a different color on all of the systems/motherboards I have had.
  • JD99

    15 Posts

    325

    0

    Posted January 13th, 2008 18:00

    packerFan07,

    Yes, you would think that would be the case but it was not.  If you look at the motherboard the SATA slots are not arranged in such a way that it is obvious which slots are which.  Slots 0 and 1 are straight-forward, but 2, 3, and 4 are arranged in a way that it is not obvious.  As it turns out, slot 2 was not used; but even if they would have used slot 2, I would not have had a problem with the original configuration (only occurred when I put a second hard drive in the system).  When I plugged the second hard drive in the system Adobe Premiere Elements would hang on start-up (all other applications seemed to work fine, and the hard drive still functioned fine otherwise).  Moving any device from slot 2 fixed the problem.  Aside from a device occupying slot 2, the order in which the devices were plugged in did not seem to matter – only that one of them was an additional hard drive. Again, this occurred on two separate systems and three motherboards! 

    Adobe Premiere Elements hung at startup initialization when the plug-ins were being loaded.  I have seen some comments that Premiere Elements hangs on a plug-in that starts with an ‘X_’  I think.  As it turns out, this is the last plug-in that is loaded, so I think all the plug-ins get loaded and Adobe fails in the initialization somewhere.

    Can I ask what drive size, manufacturer, etc you added and the size of the original drive?  Can you confirm that slot 2 is now occupied? You have run Adobe Premiere Elements, correct?  If that works, it must be something specific to my configuration.



    Message Edited by JD99 on 01-13-2008 02:24 PM
  • GianMC

    32 Posts

    325

    0

    Posted January 14th, 2008 00:00

    My rig came with a 320 gig hard drive, and I decided to purchase another hard drive: the Western Digital Caviar 750GB hard-drive.
     
    I am so glad I did not connect to SATA 2. I was going to, but the cord had was protruding so that it wouldn't be able to fit. SATA 4 was away from the other 4, so luckily - I was able to fit it. Everything is working great.
     
    I did have an issue with quicktime, albeit. My iTunes movies and videos were really buggy, and I did some research just to find out it's an issue with Intel's RAID manager or something. So I downloaded the latest Intel Matrix Storage Manager - and voila, my quicktime videos were up and running again.
     
    My concern is: with a RAID 0 array - I'm only able to use 596.2 GB. Is that normal?
  • wynand32

    366 Posts

    325

    0

    Posted January 14th, 2008 01:00

    GianMC - yes, it's normal that you're only seeing 596.2GB on your RAID 0 config. Your drives are technically supposed to be matched, and since they're not, your RAID 0 stripe has to match the smaller of the drives. You have 640GB, which of course is really what you're seeing.
  • GianMC

    32 Posts

    325

    0

    Posted January 14th, 2008 06:00

    LOL - thanks for the response. I should've done some research and bought something smaller. Oh well, it was on sale @ Circuit City and I felt the need to dispose my holiday gift cards.
     
    Everything is working perfectly since my last thread(s) of complaints. It took some time, but I can now genuinely say that I am a proud Vista user. Once you turn off UAC (among many other useless features) and download the updates, Windows works as it should!
     
    peace,
    Gian
  • packerFan07

    705 Posts

    325

    0

    Posted January 14th, 2008 12:00

    Orignal setup
    slot 0 = hdd (500 gb samsung)
    slot 1 = cd/dvd
    slot 2 = cd/dvd
    this is what I was trying to say 0,1, and 2 were already used...
    slot 3 = hdd (500 gb samsung)
     
    when I have a chance, I will swap connectors and see if I encounter the same problems...