
UNSOLVED
S
slyman_32bc9b
1 Message
0
5497
November 4th, 2003 18:00
Win XP upgrade causes USB ports UNDETECT devices
I just upgraded my Win XP home edition to Pro. Then I updated the installation with Windowsupdate. Now, NONE of the USB ports work!! Before I updated to XP Pro, all the ports were working fine.
I tried plugging in my printer, my camera, etc....and it would not give me ANY response at all. Not even a message saying new hardware has been detected. The system just couldn't detect any of the USB devices I connect to the machine.
Is this a problem with Win XP pro? The hotfixes that were installed? Anyone has the same problems?
Responses (3)
Solutions (0)
Removing all your USB entries in the device manager and reinstalling it should work. Check the thread below.

fireberd
11 Legend
•
33399 Posts
•
112848 Points
214
0
Posted November 5th, 2003 09:00
SP Pro, itself, wouldn't cause any problems. I upgrades my PC from home, with everything working properly to Pro, with an upgrade CD not a clean install and there wasn't any I/O issues. In fact only a couple of programs had to be reinstalled, such as my printer drivers and MS Office.
Check the Windows Device Manager and the USB Controller to see if there are any problems. Even if there are no problems, uninstall the USB and then restart Windows and it will reinstall it. That may take care of the problem.
If that doesn't take care of it, check the BIOS as there may be a problem that the BIOS is not detecting it or dectecting correctly. You may want to reset the BIOS to the default settings, even if nothing has been changed in the BIOS. If the BIOS isn't detecting a device or detecting it properly then Windows will not detect it or properly.