UNSOLVED

mfizzel

updated

19 years ago

M

mfizzel

1 Rookie

•

37 Posts

0

7704

June 12th, 2007 18:00

Why is my USB 2.0 running at USB 1.0 speeds?

I just bought a new Western Digital 500GB external harddrive that is usb 2.0, I also bought a usb 2.0 cable...but when I copy/move data to/from the new drive it is SO slow, around 12-15mb/s which is usb 1.0 speeds...anyone know how I can find out what the issue is? I've tried 2 different usb 2.0 cables, and have also tried the front and back ports of my XPS 700 but its still running at 1.0 speeds. I checked with western digital support and there is no switch or option to change from usb 2.0 to 1.0, it should just run at 2.0 by itself. What's the deal, anyone know what's up? Any help is GREATLY appreciated
  • spidymich

    16 Posts

    354

    0

    Posted June 12th, 2007 21:00

    I had the same problem, try this:
    Right click on 'My Computer' and go to Manage.  From there open Device Manager, click the little plus tab next to Universal Serial Bus controllers.  If you see any yellow question marks or flags, right click on Update Driver Software.  Just let windows search for the newest driver, it should fix everything.  Hope this helps.
  • mfizzel

    1 Rookie

    •

    37 Posts

    354

    0

    Posted June 13th, 2007 01:00

    hey, thanks for the reply nope, no yellow signs in device manager the search continues!
  • 354

    0

    Posted June 13th, 2007 17:00

    threre is one thing you could try, go into the BIOS and make sure legacy support for UBS is disabled. I think this forces it to 2.0 and maybe 1.1  all my equipment never had a problem with not being on legacy support enabled.
  • mfizzel

    1 Rookie

    •

    37 Posts

    354

    0

    Posted June 13th, 2007 18:00

    thanks for the tip, but I cant find any USB legacy options in the BIOS...hmmm, and I'm running the latest BIOS too