UNSOLVED

JUGORNOT

updated

21 years ago

J

JUGORNOT

3 Posts

0

7305

January 20th, 2003 14:00

Virtual Memory

I keep getting a prompt that says "Virtual Memory minimum is too low."  My computer is sluggish and freezes up all the time.  I have to reboot a lot to get programs to run properly.   This also causes some programs not to run efficiently.  When I try to use the CD burner, it will stop before the burning is complete.  I have thrown a bunch of useless CD's away.   What is going on?
  • lbrock

    31 Posts

    390

    0

    Posted January 20th, 2003 15:00

    Don't know what operating system you are using, but it you use XP then you check your virtual memory settings this way. Press start, right click on my computer, select properties, click on the advanced tab, then under the performance tab you select advanced and on the bottom you can adjust your virtual memory setting.  If you are unfamiliar with these settings I recommend you select "system managed size", then just reboot.  That should put you back to default settings for virtual memory.  Good luck and happy puting...
  • TC45XX

    65 Posts

    390

    0

    Posted January 20th, 2003 15:00

    jugornot,

    Virtual memory is "extra" memory that is obtained by swapping out physical (real) memory images to the harddisk. When your "need" for physical memory is exceeded .. the contents is written out to disk to free it up.

    Of course .. this is a lot slower than reading from actual physical memory and the more frequently you have to swap the slower your machine will execute programs. The computer often ends up spending more time swapping memory images than it does processing (running programs that it swapped in to work on).

    You can add more physical memory to reduce swapping ...but if you are getting "virtual memory" sizing errors then go to ...

    Control Panel / System / Advanced / Performance - Settings / Advanced

    and adjust the settings for "virtual memory" ...

    If you  don't know what you want to do there then select "System Managed Size" ....

    or IMHO ...

    I would select the "recommended amount" but set that amount as both the minimum and maximum. This keeps you swap file from constantly changing size on your disk (which slows things down even more sometimes).

    IMHO as always ...

    campbell

     

  • JUGORNOT

    3 Posts

    390

    0

    Posted January 20th, 2003 19:00

    I tried your suggestion.  I think it worked! 

    Thanks!

  • JUGORNOT

    3 Posts

    390

    0

    Posted January 20th, 2003 19:00

    I tried your suggestion.  I'm pretty sure it worked.

    Thanks!

  • clemmis99

    13 Posts

    390

    0

    Posted March 21st, 2006 19:00

    I am getting this same message, and my computer is brand new, 160 gig HD and 1 meg of memory. This computer is very very slow and sluggish. I did adjust the memory thing and i still got that message. Please Help