UNSOLVED

sheppardwk

updated

20 years ago

S

sheppardwk

12 Posts

0

3853

November 7th, 2006 23:00

USB Ports on 1704FPT not working

Last Friday, I shutdown my 8400 and when I attempted to turn it on Saturday the Amber light was blinking.  Reviewing the Forums indicated that I had a Power Supply Unit (PSU) error.  I contacted Dell spare parts on Monday and today I received my new PSU.  Carefully, I replaced the PSU and reconnected all the cables and pressed the power button.  Everything came on and all seemed to be well.
 
However, when I attempted to plug in a USB cable to the Dell monitor, nothing happened.  I unplugged the USB cable leading from the monitor to the computer and reinserted it into a different USB connector.  No change.  The same for the monitor plug as well.  I then connected the device to the USB ports below the power button and they worked fine.  I checked in Device Manager for any error indicated under the Universal Serial Bus controllers and did not see any.  I could not determine which ones were actually located on the monitor though.
 
Can anyone shed some light on what I need to do to restablish the USB ports on the monitor?  I really like their convenience.
 
Thanks.
  • fudgieguys

    1308 Posts

    70

    0

    Posted November 8th, 2006 17:00

    FYI.
    Was the USB cable from the monitor originally plugged into the back of the computer or on the front?
    Since you did replace the PSU, open the computer to see if all the cables are seated properly.  Then try again.