UNSOLVED

marteen

updated

26 years ago

M

marteen

1 Message

0

5775

January 15th, 2001 16:00

tranfering data from old computer to new

I have a 3 year old Optiplex GXa and just bought a new Dimension 4100. Without a Zip drive, 2nd hard drive or CDRW on my old computer, how do I tranfer all my data from the old to the new?

Marty
  • MrHobbes

    9 Posts

    162

    0

    Posted January 15th, 2001 16:00

    Well you could dig up a gigantic stack of floppies :-)

    One way would be to remove the HD from your Optiplex, jumper it to slave or cable select, and plug it into your new comp. Then you can just copy the data directly from HD to HD. When you are done, put the jumper back and return the old HD to your GXa.

    If you want some pictures check:
    http://support.dell.com/docs/systems/dzuul/rr.htm
    for your 4100

    for your GXa:
    http://support.dell.com/docs/systems/dfuj/remove.htm

    Another method would be to network the computers together, but if you don't already have 2 NICs and a hub or crossover cable, this would be much more work.

    (sure you can pull your new HD and put it in the old comp also)





    Send me an email
    18779713, status:



















  • G Lang

    2 Intern

    •

    219 Posts

    162

    0

    Posted January 16th, 2001 01:00

    MrHobbes idea of putting the old drive as a slave is easier, but if you got a burner with the new computer there is another way I have used, but only once.
    I took the burner from the new computer and installed temporarily (not in a drive bay but lust laid it on the computer) into the old and copied a bunch of files to the CD's. Then reinstalled the CD-RW back to the new computer. That also gave me a backup of the older files. The hard drive to hard drive MrHobbes mentioned is probably easier (have done it both ways), but this is an alternative.
    Good luck

    Glen
    4100 933Mhz
    19VH001
    FFD4001
    Win98SE