UNSOLVED

babu92

updated

25 years ago

B

babu92

2 Posts

0

3423

November 13th, 2001 23:00

The button came loose

After routinely pressing the shutdown or power up button for years, this afternoon I pressed it and, while the computer powered up, the button clearly became dislodge from whatever held it in place within the tower. It's still visible, but I don't dare shut my machine down now for fear the button will disappear inside the plastic cabinet. Is there anyway to take off the front of the cabinet in order to get at the button and replace it in its original, stable location? It seems to be a relatively simple -- even for me -- operation, but I can't pry open the cabinet's outer plastic shell in order to access the button and its housing. Help!

  • Goonboy

    2 Intern

    •

    2433 Posts

    387

    0

    Posted November 13th, 2001 23:00

    nt = No Text

    :-þ
    Get out!  Leave while you still can!  Aiyeeee!
    Click Here
    "Annoy the boring."


  • babu92

    2 Posts

    387

    0

    Posted November 13th, 2001 23:00

    Excuuuusssseee me. You obviously know nothing about the depth of ignorance I possess regarding this machine.

    It is, according to a document I saved that -- at some point in the past I deemed important -- shows this to be a "200MHz Pentium with MMX Desktop DM20DT - [220-9047]"

    Does that make sense? There's also this dark gray and narrow rectangle centered at the top of the cabinet. On it are the words "Dimension XPS M233s".

    Is that enough of a clue?


  • Jim Hardin

    2 Intern

    •

    2053 Posts

    387

    0

    Posted November 13th, 2001 23:00

    PJ: You did not specify the system you have…

    Generally, if you take the side panel off you will be able to depress the plastic tabs that hold one side of the front panel on. Then the front should swing away like a door.

    You will find an unnecessarily complex arrangement of linkage so that huge button can press the tiny micro switch in the frame.


  • Goonboy

    2 Intern

    •

    2433 Posts

    387

    0

    Posted November 13th, 2001 23:00


    babu92 wrote:
    - Excuuuusssseee me. You obviously know nothing about
    - the depth of ignorance I possess regarding this
    - machine.




    I'm beginning to catch on, though. ;-)

    http://docs.us.dell.com/docs/systems/dter2/removing.htm

    That should cover all the necessary components - just look for the item you wish to remove. Cover and Front Bezel will probably be sufficient.


    :-þ


    Get out!  Leave while you still can!  Aiyeeee!
    Click Here


    "Annoy the boring."














  • Goonboy

    2 Intern

    •

    2433 Posts

    387

    0

    Posted November 13th, 2001 23:00

    If you'd clue us in as to which model you have, someone could point you to the right page for pulling the bezel off.

    :-þ


    Get out!  Leave while you still can!  Aiyeeee!
    Click Here


    "Annoy the boring."






  • kleinertje

    12 Posts

    387

    0

    Posted November 14th, 2001 03:00

    I had a Dimension XPS Pentium Pro 200 where that happened twice. After you figure out how to open the side panel, just use some superglue to glue the plactic button and plastic extension back to the frame. It is just a mecganical thing.