UNSOLVED

mweiblen

updated

26 years ago

M

mweiblen

3 Posts

0

5392

September 6th, 2000 15:00

System still having boot problem

Last night I talked about a system I had loaded win95 on and would not boot, then later it would. Now the only way it will boot is to press the reset button. A simple power on does not work. I can hear the post but no video and no further activity. If I press reset all works fine.

I checked all connections rocked all the cards etc?
  • DELL-Cody

    2 Intern

    •

    2166 Posts

    70

    0

    Posted September 7th, 2000 22:00

    You may want to try cold-booting the system with various devices disconnected, such as the hard drive, CDROM drive, or other peripheral (always disconnect internal components with the system powered off and unplugged). If the system boots normally after removing a certain component, it may need to be replaced. If the system still will not boot with all internal components disconnected, begin removing expansion cards (again, with the system off and unplugged) until all that is left is the video card. At some point, one piece of hardware should be identified as the problem.