
UNSOLVED
Sysprep'd image to a GX280
Our reference system is a GX260 and when adding support for new hardware we have been simply adding the new drivers and entries to the Sysprep.inf file (see below). This has worked fine in the past, but a GX280 won't boot into mini-setup. It tries to boot, fails, brings up the safe mode boot menu and repeats.
The other weird thing is that when I try to build the mass storage driver section on a 280 (with the drivers loaded) I don't see any devices with a HWID matching the IDE controller in the sysprep.inf...
Any help would be greatly appreciated!
----- (Relevent Sysprep.inf sections) -----
[Unattended]
DriverSigningPolicy=Ignore
UpdateInstalledDrivers=Yes
OEMPnPDriversPath=source\drv\GX280;source\drv\GX270;source\drv\GX260;source\drv\d600;source\drv\C840;source\drv\GX150
DriverSigningPolicy=Ignore
UpdateInstalledDrivers=Yes
OEMPnPDriversPath=source\drv\GX280;source\drv\GX270;source\drv\GX260;source\drv\d600;source\drv\C840;source\drv\GX150
[SysprepMassStorage]
PCI\VEN_8086&DEV_2651 = C:\SOURCE\DRV\GX280\ich6ide.inf
PCI\VEN_8086&DEV_2652 = C:\SOURCE\DRV\GX280\ich6ide.inf
PCI\VEN_8086&DEV_266F = C:\SOURCE\DRV\GX280\ich6ide.inf
PCI\VEN_8086&DEV_2652 = C:\SOURCE\DRV\GX280\ich6ide.inf
PCI\VEN_8086&DEV_266F = C:\SOURCE\DRV\GX280\ich6ide.inf
PCI\VEN_8086&DEV_24DB = C:\SOURCE\DRV\GX270\ich5ide.inf
PCI\VEN_8086&DEV_24CB = C:\SOURCE\DRV\GX260\ich4ide.inf
PCI\VEN_8086&DEV_24CA = C:\SOURCE\DRV\D600\ich4ide.inf
PCI\VEN_8086&DEV_248A = C:\SOURCE\DRV\C840\ich3idem.inf
Responses (4)
Solutions (0)
- I added in a sysprep.inf entry for a generic IDE controller, and now the mini-setup starts but locks up in the middle. It simply says "Please wait...", and never continues. I believe this is the point where device detection occurs, but I'm not sure.---- For posterity, here is what I added to my previous sysprep.inf [SysprepMassStorage] section; Generic IDE Controller
; Should only be used if there are problems loading the manufacturer drivers!
; Verify that the appropriate IDE drivers are being loaded by the system, not
; these generic drivers as performance may not be optimal.
*pnp0600 = c:\windows\inf\mshdc.inf
pci\cc_0101 = c:\windows\inf\mshdc.inf
primary_ide_channel = c:\windows\inf\mshdc.inf
secondary_ide_channel = c:\windows\inf\mshdc.inf

DaveyB0_2
1 Message
135
0
Posted October 26th, 2004 09:00