UNSOLVED

JIMLAURIE

updated

26 years ago

J

JIMLAURIE

2 Posts

0

12254

November 29th, 2000 01:00

SCANDISK

We tried running scandisk and it took almost an hour which seems way too long. It then flashed the following message: Scandisk has restarted 10 times because windows or another program has been writing to this drive. Quitting some running programs may enable scandisk to finish sooner. Do you want to continue receiving this warning? This was strange because we had nothing else open. Any ideas?
  • Goonboy

    2 Intern

    •

    2433 Posts

    440

    0

    Posted November 29th, 2000 01:00

    Was your anti-virus program running? Do you have screensavers, or power management functions set to turn on at a certain time? Task scheduler? While not considered to be "open programs" by most folks, any of these can hinder the operation of scandisk or defrag. You might also try running these from safe mode, and see if they work there.



    Get out!  Leave while you still can!  Aiyeeee!
    Click Here

    Shortcut to DellT@lk users FAQ Web Site - Opens in a new window.


    "Life is too important to be taken seriously."
  • JIMLAURIE

    2 Posts

    440

    0

    Posted November 29th, 2000 01:00

    Thanks for the ideas. We hate to sound stupid, but what is safe mode and how do we find it?
  • 440

    0

    Posted November 29th, 2000 01:00

    Safemode is a mode of windows that basically runs no programs besides windows (full safe mode disables things like network and stuff). No matter how screwed up windows is, 99% of the times, you should be able to boot in safe mode. It's good if you are having a problem booting and you need to delete something to solve the problem

    To get into safe mode, boot your computer and watch the booting procedure. Right as the Splash Screen appears (the one with the clouds that says "Windows 95/98" and has that little line bar moving at the bottom of your screen), press F8. You'll get a few menu options and the one you probably want is safe mode. If you ever accidentally turn off your computer while the splash screen is displayed, this menu should come up automatically as a fail safe. Good luck!
    --
    Rob
    wolverinero79@hotmail.com
    rwilling@gonzaga.edu
  • Goonboy

    2 Intern

    •

    2433 Posts

    440

    0

    Posted November 29th, 2000 01:00

    Depending on what system you have, you might only be able to get into safe mode by pressing and holding the CTRL key immediately after you hear the Power On/POST Beep, then waiting for the options menu and selecting #3/Safe Mode. That's the only way I've been able to get it to work reliably on this Dimension XPST450 with Windows 98SE, and it works every time.



    Get out!  Leave while you still can!  Aiyeeee!
    Click Here

    Shortcut to DellT@lk users FAQ Web Site - Opens in a new window.


    "Life is too important to be taken seriously."
  • Denny Denham

    2 Intern

    •

    18798 Posts

    440

    0

    Posted November 29th, 2000 02:00

    Other options include:

    Go to Start|Run, type Msconfig and click OK. On the General tab click "Advanced" and on the menu that appears check "Enable startup menu."

    Put a non-bootable floppy disk in drive A:\. Reboot. When you receive the message that there is a non-system disk in drive A:\ remove the floppy, then press F8 twice.



    Sorry, your browser doesn't support Java.




    Want to make a hyperlink in your post, want to add a graphic or sound file, need to troubleshoot a non-working Java applet, want to build an attractive signature? These capabilities can be yours if you visit Denny's DellT@lk Tutorials.
    For help in deciding what can be eliminated from your Startup list, take a look here.
    Want to get rid of Network Neighborhood, change your Registered Owner name? Check out the little utilities at Delltalk Tweekz.
    Ready to sign up for Web server space? Want to learn FTP? Visit Web Presence for Beginners.
  • JTA

    1 Rookie

    •

    60 Posts

    440

    0

    Posted November 29th, 2000 02:00

    I was just told yesterday to run scan disk and defrag from Safe Mode. Thought I'd pass that on.
  • ateisha

    38 Posts

    440

    0

    Posted November 29th, 2000 12:00

    I run scandisk regularly from windows but thought I would take your suggestion and run it from the Safe Mode. When I tried to run it in Safe Mode, I got an error message saying that Windows had errors in the boot up and did I want to fix them. I say yes.

    Then scandisk ran in the Safe Mode (really interesting to watch the graphics while it runs).

    So I am wondering, how did scandisk run in regular Windows with no problems, but not in Safe Mode until Windows errors were fixed? I never would have known about the errors if I had not tried the Safe Mode scandisk.
  • JTA

    1 Rookie

    •

    60 Posts

    440

    0

    Posted November 29th, 2000 23:00

    I got the suggestion from Dell, when I had some other problem and got into a discussion with the customer service rep.

    It made sense to me. I too always ran it in regular mode. But, when you run it in Safe Mode, you are not dealing with all of the other things that you have attached. e.g. cd rom, scanners, printers, zip drives, etc. It seems to deal with less "stuff" on you hard drive, therefore has more bits to scan and decompress. (very techie talk, no?)

    Sorry, best I can do.

    John
  • chimney

    147 Posts

    440

    0

    Posted December 3rd, 2000 19:00

    Safe mode is where any changes to your system should take place, in theory; for instance adding new software, etc. Windows was designed for safe mode to allow one to boot the system with a minimal set of drivers for troubleshooting and maintainence tasks like defrag and scandisk.
    It is a good habit to get into; though I do not use it as much as I ought to.
    Carter