
UNSOLVED
Problem with new RAM for an XPS 720
I recently bought 2 X 2 GB strips of OCZ Reaper RAM and installed them, but my system is only registering 2.5 GB of RAM when I check it in the System info. I tried installing these strips in the RAM slots with the white locks (they are currently in the ones with the black locks) but the system won't boot in this set up so I had to switch them back to the black slots. If anyone knows how I can fix this please let me know.
Responses (12)
Solutions (0)
chris_mosher
1 Rookie
•
43 Posts
706
0
Posted September 19th, 2009 13:00
No, there's really nothing you can do, except change versions of Windows. That said, I would wait for Windows 7, and get a 64bit version. No sense in jumping to Vista now when Windows 7 is just around the corner.
The white tabs are the primary slots, slots 1 & 3. First put one ram stick into slot number 1 the slot closest to the processor . Boot an check the reported amount of ram in the Bios.
Then power down and replace the first stick with the second one. Again reboot and check reported ram in the bios.
If both sticks check good singularly then place both sticks into the slots 1 and 3 and boot into the bios and check reported ram amount.
Now something else I am curious about. And that is the voltage specs of the ram sticks. The 7xx series are very picky about the ram voltage.
Can you provide a link to the ram you bought. I have OCZ reapers in my rig and have 8 gigs.
http://www.amazon.com/gp/product/B000XBO228/ref=ox_ya_oh_product These are the RAM I bought, they seem to be the same ones you have according to your sig but in the 2 gig form. Whenever I have both strips in the primary slots my system won't boot, it simply gives me some diagnostic beeps (which I have had problems with before with the Corsair ram that came with the system, it may be the motherboard but I'm not entirely sure how to test this). To check in BIOS like you're suggesting, I would enter setup before windows boots correct?
Alright, I did the single stick test and both sticks are indeed reading 2 gigs each. Then I installed them into slots 1 and 3 and booted up without any trouble (which is strange because when I tried this last night it wouldn't boot and gave me the diagnostic beeps, not sure what changed) I checked the BIOS again and it's reading 4 gigs in dual channel mode but Windows is still reporting 2.5 gigs when I check the system in control panel. Am I still receiving the benefit of 4 gigs even if windows is only reporting 2.5?
Thanks for the reply.
My OS is Windows XP Media Center Version 2002 Service pack 3.
2 X Nvidia GeForce 8800 GTX video cards.
Intel Core 2 Quad CPU Q6600 @ 2.40 GHZ.
AGEIA PhysX AG1011 Physics Processor.
ACPI Multiprocessor PC
Not sure what else is needed but just let me know and i'll post it.
chris_mosher
1 Rookie
•
43 Posts
146
0
Posted September 20th, 2009 14:00
Yup, as I said earlier, your problem here is the memory limitation of 32bit versions of Windows. And with two 768MB video cards, that doesn't help. You should definitely look into a 64bit version of Windows 7 when it is released.

chris_mosher
1 Rookie
•
43 Posts
706
0
Posted September 19th, 2009 01:00
I imagine that you are running either Windows XP or a 32bit version of Vista, and most likely are running two video cards (SLI or Xfire). All 32bit versions of Windows can address only 4GB of total memory, including system and video. Even when only running one video card, I've seen 32bit versions of Windows report as little as 3GB with 4GB installed.