UNSOLVED

medina619

updated

20 years ago

M

medina619

1 Rookie

•

11 Posts

0

27272

May 12th, 2007 16:00

power supply upgrade

what would be a good power supply upgrade for my  e520 pc.
  • shesagordie

    12 Elder

    •

    46017 Posts

    690

    0

    Posted May 12th, 2007 18:00

    medina619

    The E520 system does not use a Dell proprietary power supply, you can install most standard ATX power supplies with a 24-pin or 20+4-pin main motherboard power connector. As the E520 has an open back panel, a power supply with or without the on/off switch can be installed. Similar to the units shown here.

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • 690

    0

    Posted May 12th, 2007 18:00

    Just a suggestion, I'm sure you can find cheaper, but for just an idea:
     
  • Gb755c

    2 Intern

    •

    453 Posts

    690

    0

    Posted May 14th, 2007 05:00



    shesagordie wrote:
    medina619

    The E520 system does not use a Dell proprietary power supply, you can install most standard ATX power supplies with a 24-pin or 20+4-pin main motherboard power connector. As the E520 has an open back panel, a power supply with or without the on/off switch can be installed. Similar to the units shown here.

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.


    The Dell E Series all use BTX motherboards and likewise need a BTX power supply
  • Cypherus

    2 Intern

    •

    336 Posts

    690

    0

    Posted May 14th, 2007 16:00

    The Dell E Series all use BTX motherboards and likewise need a BTX power supply
     
    Any standard ATX 24-pin PSU will work, providing the back of the case is open for an on/off switch.
  • shesagordie

    12 Elder

    •

    46017 Posts

    690

    0

    Posted May 14th, 2007 17:00


    @Gb755c wrote:


    @shesagordie wrote:
    medina619

    The E520 system does not use a Dell proprietary power supply, you can install most standard ATX power supplies with a 24-pin or 20+4-pin main motherboard power connector. As the E520 has an open back panel, a power supply with or without the on/off switch can be installed. Similar the units shown here.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.


    The Dell E Series all use BTX motherboards and likewise need a BTX power supply



    This is not correct, I suggest you browse the Dimension Upgrade Hardware board, about this subject.


    Bev.

     

     

     

    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.

  • fx4baja

    119 Posts

    690

    0

    Posted May 15th, 2007 06:00

  • Gb755c

    2 Intern

    •

    453 Posts

    690

    0

    Posted May 15th, 2007 15:00

    We have an E521 and the motherboard is on the opposite side of the case as most standard ATX cases.  I sent my friend a pic of the inside of it with my Digital Camera and he told me that it's a BTX model and the way the power supply is sitting in it the thing doesn't even have the standard fan in the back there appear to be vents in the back and the thing is sitting in the case sideways.  I've had the case open twice since we've receieved to blow dust out of it with a compressed air can. 
  • MiF_STIG

    5 Posts

    690

    0

    Posted May 15th, 2007 20:00

    I have a Dimension 5100 with a BTX motherboard.
     
    I replaced the power supply by an Enermax EG460... , and it is written ATX on the box, and it works perfectly fine !
    So please stop bellieving everything that Dell says ; as long as your new power supply as the exact number of pins (20+4) to connect to the mother board, you'll be alright.
     
    Alex.
  • shesagordie

    12 Elder

    •

    46017 Posts

    690

    0

    Posted May 15th, 2007 23:00


    @MiF_STIG wrote:
    I have a Dimension 5100 with a BTX motherboard.
     
    I replaced the power supply by an Enermax EG460... , and it is written ATX on the box, and it works perfectly fine !
    So please stop bellieving everything that Dell says ; as long as your new power supply as the exact number of pins (20+4) to connect to the mother board, you'll be alright.
     
    Alex.




    Thank you.


    The same info, as I've been preaching. 


    Bev.

     

     

     

    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered. 

  • Gb755c

    2 Intern

    •

    453 Posts

    102

    0

    Posted May 16th, 2007 01:00

    Ok Now I understand just one final question what is the difference between a 24 pin power supply VS a 20+4 pin one? don't they technically have the same # of pins?