UNSOLVED

EdnaM

updated

19 years ago

E

EdnaM

2 Intern

•

557 Posts

0

6823

August 20th, 2007 18:00

Need help please!

My son has a Dimension 4550. Windows XP Home.... He has a problem! He doesn't know what to do and he doesn't even know how to ask for help so here I am again asking for him.

His DVD Drive does open. His CD Drive doesn NOT open.

When he turns on the computer he gets a black screen reading something like this:
Secondary hard disk drive 1 not found. (He can't open one of the CD Drive)
Press F-1 key to continue, F-2 to run the setup utility.

I have gotten ahold of Dell Support twice. First time I thought we had it fixed. Then a TECH man had me do a few things and I thought the problem was gone. CD Drive's door did open. Until next day when son turns on computer. He gets the black screen again.

I call Dell Support again. Tech man had me press F2 and hold down ALT key and then hit a few letters on the keyboard. He said he was putting the settings back to the "default". So then I could open the CD Drive. Even the Device Mgr. had the DVD Drive and the CD/RW there. That was yesterday. This morning son turned on computer and the same black screen and the CD Drive door does NOT open.

Does anyone have any ideas?
  • EdnaM

    2 Intern

    •

    557 Posts

    441

    0

    Posted August 20th, 2007 20:00

    Thanks for the reply but that doesn't tell me what to do.
    Why after I did everything the Tech man told me to do it worked. CD door opened. There was no black screen when restarting. The next day everything was back to the trouble. Black screen reading press F1 or F2. The CD door will not open.
    So I guess I am asking why does it work one day and the next day it doesn't work right?
    Strange!
  • mombodog

    2 Intern

    •

    12735 Posts

    441

    0

    Posted August 20th, 2007 20:00

    Here is what the tech did.
     
    * Click Start- Turn Off Computer- Restart
    * Watch the keyboard lights. When they flash, tap the F2 key
    * The message, Entering Setup should appear, wait for it to enter setup (bios)
    * Press the [Caps Lock], [Scroll Lock] and the [Num Lock] keys to light up all three lights on the keyboard
    * Press the [Alt] and keys at the same time
    * The computer issues a beep
    * Press the [Alt] and keys at the same time
    * The computer issues a beep
    * Down arrow to Onboard or Integrated Devices [press Enter]
    * Set everything to On except for USB Emulation which should be set for NO BOOT
    * Press the [Alt] and keys at the same time
    * The BIOS saves settings and the computer restarts
     
     
    The CD drive or data cable is probably failing, and should be replaced.
     
     
     
     


    Message Edited by mombodog on 08-20-2007 04:23 PM
  • mombodog

    2 Intern

    •

    12735 Posts

    441

    0

    Posted August 20th, 2007 20:00

    "but that doesn't tell me what to do."   ???
     
    It tells you exactly what to do.
     
    "why does it work one day and the next day it doesn't work right?"
     
    That is the world we live in, everything breaks. :smileysad:
  • Bobman101

    693 Posts

    441

    0

    Posted August 21st, 2007 18:00

    I had this happen a while back with my HDDs. They would work when I started the computer from a cold boot, but when the computer was restarted or reset, the primary disc 0 and primary disc 1 not found message came up. The HDDs certainly worked, so it was either the IDE channel on the motherboard going bad or the cable. I replaced the cable with one from a Dimension 4300 (same exact cable) and all works fine now.

    Since in your case it's only one device on the secondary IDE channel that's failing, it's safe to say the motherboard is probably okay. Either the cable is going bad or the drive itself is. If the drive doesn't even open, it's either not getting power is going bad. Replace them in that order.