UNSOLVED

jdc

updated

27 years ago

J

jdc

1 Rookie

•

8 Posts

0

6195

May 18th, 2000 21:00

MSDOS Program

The following error message occurs when running
the "PING" or "TRACERT" programs in a DOS shell:
"This program cannot be run in DOS mode"

These programs have always worked as long as
I have been using them.

Also the following error occurs uopn start up of
Windows 98 EMM386-Unable to set page frame
buffer address.
  • jdc

    1 Rookie

    •

    8 Posts

    172

    0

    Posted May 18th, 2000 22:00

    I have a Dimension XPS D333 with Creative AWE64
    Value Sound Card. I do not have a Soundblasster
    Live Sound Card as indicated by the files listed
    in your post.
  • David .

    2 Intern

    •

    1097 Posts

    172

    0

    Posted May 18th, 2000 22:00

    The error with PING and TRACERT are a result of the error with EMM386 you are receiving. Follow one of the three possible solution below:

    • Disable DOS audio Support:
      1. Go to Device Manager
      2. Expand the Creative Miscellaneous Devices
      3. Select Creative SB16 Emulation
      4. Click the Properties button
      5. In the Creative SB16 Emulation Properties window, place a check mark in Disable in this hardware profile and click OK.

        NOTE: It is necessary to disable the SB16 Emulations in Windows, if not, the DOS audio driver (SBEINIT.COM) will load when the system is started.




      6. A red "x" will now be next to Creative SB16 Emulation...this is NORMAL.
      7. Close Device Manager.
      8. Add REM in front of the C:\PROGRA~1\CREATIVE\SBLIVE\DOSDRV\SBEINIT.COM line in the AUTOEXEC.BAT file.
      9. Add REM in front of the C:\WINDOWS\EMM386.EXE line in the CONFIG.SYS file.

        The CONFIG.SYS and AUTOEXEC.BAT file can be modified with either MSCONFIG, NOTEPAD, SYSEDIT or EDIT.

        NOTE: Placing the REM at the beginning of the DOS audio driver line will NOT affect sound support for Windows-based applications and games.




    • Add an exclusion to the EMM386 Line:

      In the event DOS audio support is required, modify the EMM386 command in the CONFIG.SYS file and add M6 I=E000-E3FF to the existing EMM386 line. The line would appear like this once the modification have been made:

      DEVICE=C:\WINDOWS\EMM386.EXE M6 I=E000-E3FF






    • Prevent EMS from loading:

      In the event the above solution still gives the EMM386 error message, add NOEMS to the EMM386 line. The line would appear like the following example:

      DEVICE=C:\WINDOWS\EMM386.EXE NOEMS

      NOTE: Previous versions of EMM386.EXE required a "/" (forward slash) before NOEMS. It is no longer required.











  • David .

    2 Intern

    •

    1097 Posts

    172

    0

    Posted May 18th, 2000 23:00

    Something else then is preventing EMM386 from loading, which is resulting in the errors. Try the third option I gave to properly disable EMM386.