
UNSOLVED
loss of audio on right channel
Greetings to all. I have lost audio on the right chhannel. I have been through the audio trouble shooting guide looking for volume, drivers, etc. I have traced the signal to the CPU box. I have no right channel audio coming out of the main box. Left channel is OK. I am looking for a schematic diagram for the audio amp. Tech. support tells me it is not available. They say changing the main board is the only option. That's bull. It's probably a coupling capacitor or a bypass capacitor that has gone bad. I am a ET with 50 years experience of repair at the component level, but I need a road map (schematic). Can anyone help? Thanks very much. James
Responses (3)
Solutions (0)
Thank you for your enlightening post. I grew up in a time, as you did, when not much went to waste. I can not condone this throw away society.
I have done the trouble shooting steps you mentioned. I will perservere and fix this thing. I am retired and have the time. We must change with the times or parish. Even if we change we will ultimately parish. Thank you once more. James
Along with no schematics, is the problem of parts availability. There are many specialized parts and finding those parts becomes impossible many times. I know it's a waste but for those of us that are or were in the repair industry we can't tell a customer it will cost $100 to fix something that they can get new for $75.
With our own equipment, not having schematics and trying to fix something is almost like the "needle in the haystack" syndrome. We may have the time but even with "knowledge" it's an "accident" if we fix many things. With the problem you are having, it could be the actual sound chip or even a driver or some other component but who is to know. With the multi layered circuitboards, we can't even trace out the circuit.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio application

fireberd
11 Legend
•
33399 Posts
•
112848 Points
199
0
Posted May 30th, 2009 04:00
First, there are NO electronic schematics available, or even logic diagrams. Dell (and all other PC manufacturers I've dealt with including IBM) does not provide that information, and only vaguely provides a diagram of the motherboard. Second, there is no power amplifier built into modern sound cards or Integrated Audio, only a low level signal that must be amplified by external powered speakers.
Second, what model PC? We can't really comment on your particular system without knowing what model you have.
I assume you have reseated the speaker connection and verified that the speaker system is OK? (basic troubleshooting). Connect a headset to the GREEN speaker jack and see if you get both channels. And/or if you have a front panel headphone jack, check that to see if you get both channels.
I too have worked in electronics since 1955 when I went in the Air Force (and worked as a guitar amp tech in Nashville in the early 70's). Schematics are a thing of the past, even at some depot level maintenance. With the price of labor in most cases a defective board (for whatever reason) becomes a throw away unit as it is cheaper to produce a new one than it is to repair it. With most motherboards being multi-level boards specialized equipment is needed to even work on them (desoldering and soldering), and the "surface mount" components.
If there is an Audio hardware problem on the motherboard, the least expensive option is to install a PCI sound card and use that rather than the Integrated (on the motherboard) audio chip.
A retired friend that has an EE degree and was in Radio and TV broadcast engineering and I were just discussing repair (or better the inability to repair) computer parts last week.