UNSOLVED

Linderman

updated

22 years ago

L

Linderman

3 Posts

0

8009

April 9th, 2005 07:00

HELP! HP 2175 All-in-one prevents my Dimension from starting up!

Hi, all. Hoping someone can help.
 
If I have my HP 2175 all-in-one printer connected to my Dimension (via USB), when I turn the PC on, it hangs. As soon as I unplug the USB cable, everything loads fine (I don't even need to turn the PC off!). If I connect it once the computer gets going, again, everything's fine, and I can print just fine.
 
I went to the HP site, and they said there were issues with Dimensions and HP printers, but wouldn't say anymore, other than I may need to upgrade my BIOS; also that it wasn't their fault.
 
My specs:
Dimension 4550
Windows XP
 
Any suggestions?
 
Thanks!
  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    238

    0

    Posted April 9th, 2005 09:00

    Your problem is a setup option in the BIOS.  The BIOS has an option for USB "no boot" (not sure of thje exact wording).  But, disable that option and it will boot normally.
     
    If ithe BIOS is set for USB boot (default) then it will try to boot from any connected USB device and since a printer, all in one, etc are not bootable devices it has to go through the "time out" cycle (a preset amount of time before it decides there is no USB boot device).
     
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • Linderman

    3 Posts

    238

    0

    Posted April 9th, 2005 23:00

    Much thanks!

     

    Giving it a shot now...

  • 238

    0

    Posted April 11th, 2005 02:00

    Unplug the printer

    Go into BIOS

    Go into Integraded Devices

    Turn off USB emulation

    Save and restart

    Plug back the printer.

    See if your problem is fixed.

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    238

    0

    Posted April 11th, 2005 20:00

    Dragons and Dreams, the "USB No Boot" is the recognized fix for this problem and was originally provided by a Dell Moderator over a year ago.  It has fixed everyones slow boot problems because of USB, that I know of.
    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • 238

    0

    Posted April 11th, 2005 20:00

    I see, thanks for the heads up. Tried looking at the a 4550 here though but there are no option on "USB No Boot".  The only thing I can see that might be near it is usb emulated. Am I missing something?

     

  • Linderman

    3 Posts

    238

    0

    Posted April 12th, 2005 02:00

    I think it depends on what BIOS you have; I'm running A05, and I had to follow the steps almost exactly as Dragons & Dreams laid out; going into Integrated Devices first is key (that's where you flip the switch for USB No Boot).

    I figured a fix would be posted somewhere, but if you search on any of the terms specific to my problem -- HP 2175, Dimension 4550, etc. -- nothing would come up. Hopefully now it will, in case anyone else has the same problem.

     

    Again, thanks all for being so helpful!!