
UNSOLVED
Extremely Slow
The pc is a Optiplex GX 150 running Windows 2000 operating system and attached to a Novell network. At times this pc performs beautifully then all of a sudden it starts to run very slowly. Matter of fact from the moment it is fired up until it reached the windows desk top can take up to 10 minutes. In the past, Dell had me replace the hard drive, which I did, and it worked fine for awhile. Then I was to run defrag, which I did, and it worked fine for awhile.
It’s BACK! It runs extremely slow but it runs. Opening any software takes just as much time. Everything which is not necessary when firing up the PC has been removed, such as a couple of programs in the Start up folder. But as I said earlier, even when it is up and running everything you do takes a long time.
Any thoughts?
It’s BACK! It runs extremely slow but it runs. Opening any software takes just as much time. Everything which is not necessary when firing up the PC has been removed, such as a couple of programs in the Start up folder. But as I said earlier, even when it is up and running everything you do takes a long time.
Any thoughts?
Responses (27)
Solutions (0)
- i dont think grounding is the problem...i had a new dell in february (sent it back after two weeks) and nothing i tried would help the problem...sometimes yes sometimes no....i had some geek friends try to figure it out but no....contacted dell...but no....all they said was to send the error logs whenever anything screwy happened......hrm...so no more dell for me because i think (and maybe i am crazy for thinking this) that if one buys a brand new pooter with all the latest s**t then that pooter should work...everyone i know with a new dell reports similar problems.....in fact the school i attend right now is decked out with spankin new optiplex GX240's that still smell like the frickin factory...yet the loads are SLOW! even for things like word etc.......hotmail does not respond at all on these pooters (believe me i have checked on other systems and pooters) sometimes it works great and then it gimps up and nothin' doin'.......i dunno peeps dell has been very disappointing thus far pretty but messed up as hecks
haygis
Try incrementally:
1/ boot with system physically disconnected from the network
2/ boot with IDE2 disconnected from the mb
3/ boot with all expansion cards removed from system (except video if you're using other than onboard).
Your previous attempts at drive replacement and defragging suggest that this problem may be software, however.
- I feel for you. My firm has 55 of the GX150's and they exhibit the same problems you mentioned - 10 mintues to log in screen, then another 10 to log in to windows after entering you password. It can take an inordinate amount of time for applications to launch up to 5 minutes or longer. If I reimage a PC then it is good for a bout 2 weeks max, before the problems startup again. Dell tells me it must be my software, but I have 500 GX110's running the same software that don't have any problem, so then they tell me it must be a software incompatibility problem with the 815 chipset. I have been fighting this problem for a year now, and I just finally was able to get the problem escalated to level 2 and my firm is a Preferred Account and this is the treatment we get. We are running win98 and Novells Zenworks for Desktops version 3. Makes me think very seriously about switching hardware vendors when we upgrade again again in 2 years to COmpaq if Dell doesn't take support issues seriously.
- Thank You!
Yes it becomes an easier problem to fix if Dell tells you it is software related. Because it is not their software.
The only way I have been able to correct it is if we shut down the machine and refire it. We do this seven or eight time and then shut it down for good (like the end of the day). The next morning everything is working fine. Also Defrag seems to help.
Here is my “technical analyses”. It’s like the PC looses all of its memory or is running low on memory so it is struggling to operate. Someone told me once that the hard drive is used sometimes as additional memory (not sure if this is true or not). So the pc is using it hard drive to fire up and it is being taxed also with memory duty. I am sure I am way off base here, but there it is.
Thank you all for your replies!
i have a few Dell GX150's and i am having slowness every few weeks with this particular machine ..
i have read trough all the newsgroups and have found the smilar problem but not even one solid answer from Dell !! that means some thing to me .. may be that particualr GX 150 Batch is a S**T batch !!
spent more than a few days on this problem .. i have confirmed that this is hardware related since i have swapped the Hard disk on an identical PC to the one with the Slowness and it did not make a diffrencre.
if anyone is curious it is running Win 2k
In my case it was some type of funny grounding problem. If the system case was open slightly everything would run fine. I was able to fix the issue by bending the metal clips on the drive rails out slightly so the drive would get a better ground.
Droid
My company have also had this problem with a number of the Optiplex 150's. For each of the machines it has happened on we have gotten Dell to come out and replace and the motherboard. It seems it might have something to do with the onboard NIC?? When the new motherboard is installed it works great!
Our company has used dell for about 4 years now. We have had GX-110 both tower and desktop, gx-150's and more recently gx-260's.
Frankly the gx150's are the worst of the lot. There are at least two per week that demonstrate the symptoms being discussed in this forum. My question is Why hasn't Dell owned up to its responsibilities admitted a problem and coped it sweet. It seems very sneaky to continue denying a problem and suggesting its the S/w that's running on it.
We have tried all of the suggestions, but one fix that work regularly is flexing the motherboard or playing with the ram slot. On every machine this works for a small period of time. If the MB is the problem, then they could all be replaced. Simple as that.
joe

droid256
73 Posts
985
0
Posted September 24th, 2002 21:00
Droid