
UNSOLVED
Responses (3)
Solutions (0)
- The diags can and do miss physical problems with hard disks sometimes. Before you call about the problem, you might want to try booting to the dell resource cd, and going to the x:\advdiag\90-90 directory (x:=your cdrom drive letter.) and run hddct.exe.
This is the hard drive confidence test and is pretty good at letting you know if the drive is ok or not.
Good luck - I'm sorry I forgot to mention it earlier, but you should take the following action to protect the integrity of the data files on your hard drive if you think it may be failing and if your OS is Win 95 or 98: Search for the file "autoexec.bat" on your hard drive. Open it with Windows Notepad. Insert a new line with the text "verify=on" without the quotation marks. Close and save the file. This is an old DOS command that is still functional. What it does is force your hard drive to check every piece of data it writes to the drive after it writes it against the original data still in memory. This ensures any data files you are using can't be corrupted by faulty write operations. It also ensures that your OS isn't garbled when you do a defragment operation. The additional time your hard drive uses in this operation is negligible and it will give you peace of mind that everything being written to your hard drive is accurate even if your hard drive is in the process of failing. I use this on my system just as insurance even though I have good confidence in my present hard drive.

Sandab
28 Posts
199
0
Posted March 28th, 2001 12:00