
UNSOLVED
S
stingray355
2 Posts
0
8345
September 5th, 2005 00:00
8300 won't boot
I have an 8300 XP Pro, 1 gig ram, and put it on standby and it was hooked to a UPS came back in a couple of days and it won't boot up. I get nothing on the screen. I have yellow yellow green green lights. won't boot with cd either. Is there some procedure to return to the status I had before going to standby? Did my UPS run out of juice and crash my system? Is it just coincidence that this happened after going to standby? Help! Thanks
Responses (3)
Solutions (0)
Narnia Nitro
11 Posts
77
0
Posted September 5th, 2005 19:00
Funny - sounds like I'm having the exact same problem. I can't remember exactly, but I think I did change the standby settings the last time I used my computer. Now, whenever it starts to boot up, it stops after a second or two and the diagnostic lights on back are A+B yellow and C+D green.I read the manual part which says it's a memory module problem. However, I took them each out and tried to boot, but to no avail. I also tried switching one in place of the other, but that didn't help.This is really getting frustrating!!! And I'm out of the warranty by about a month!!stingray355
2 Posts
77
0
Posted September 5th, 2005 21:00
Thanks I removed 2 memory sticks and it booted up fine. I then was about to buy another 512 to replace the ones removed and decided to try the old ones again before I went out to the computer store. Booted fine and the full 1 gig ram shows up. I think the standby thing was a coincidence in my case. I thank you for the assistance and wish the other person good luck with their 8300. I like the Dell computers and this is the first problem I have had.

ejn63
11 Legend
•
87469 Posts
•
321256 Points
77
0
Posted September 5th, 2005 00:00