UNSOLVED

zete605

updated

19 years ago

Z

zete605

80 Posts

0

16621

April 28th, 2008 13:00

2208WFP type a little fuzzy - video card or monitor?

I am coming from a Dimension 4600 with a EVGA 6200 graphics card with a UltrSharp 19in monitor. The type looked a lot better it was much sharper.

 

Now I have a Inspiron 530 with integrated graphics and a 2208WFP Analog widescreen and the type is  a little fuzzy. My question is, is it the monitor and would therefore not make a difference if I were to buy a more expensive graphics card. I tried a cheap ATI card and it didn't make a difference... 

  • lpprikej

    650 Posts

    322

    0

    Posted April 28th, 2008 13:00

    are you running in 1680 x 1050 resolution?  If you run at a lower resolution, LCD's are almost never as clear. LCD's were really designed for their single native resolution etc... at least to look their best.

     

    If it's TYPE you are speaking of, which I take it as 2D Word Processing, it SHOULDN'T be the video card.  Basically if the video card allows for the specific resolution, 2D should look fine.  Its when you have slow downs in 3D or bumb looking 3D clarity, is when you can easily say it's the card.

    Message Edited by lpprikej on 04-28-2008 09:21 AM
  • zete605

    80 Posts

    322

    0

    Posted April 28th, 2008 16:00

    Yes, I am running at 1680x1050 resolution. I am in fact talking about type as in Word processing/typesetting. I am glad you told me it isn't the video card before I went and blew $100 on a new video card.

     

    I am using the ClearType applet from Microsoft and I have tried adjusting the brightness/contrast/gamma. What else should I try? Is it because my last LCD was a digital monitor, was that the difference?  

  • lpprikej

    650 Posts

    322

    0

    Posted April 28th, 2008 18:00

    I would say it must be the monitor. I heard mostly GOOD about that monitor though....... But of course people may have been using it differently.  Are you using the VGA cable supplied with the monitor? 

    Is it under warranty or return terms with Dell?  You could try giving them a call too i guess. 

     

    Maybe try Color Temp and slider bar settings for Colors?  That COULD make a bit of a difference. 90/90/90 maybe.

     

    The other thing here:  Was your Ultra sharp a 1905FP ?  The 1905FP and MAYBE the 1907FP were using a Samsung PVA LCD : http://en.wikipedia.org/wiki/TFT_LCD#PVA

     

    Whereas your 2208WFP use a cheaper TN lcd http://en.wikipedia.org/wiki/TFT_LCD#TN_.2B_film

     

    I know color saturation can be an issue with the 2208 along with the viewing angle etc....

    Message Edited by lpprikej on 04-28-2008 02:07 PM
  • zete605

    80 Posts

    322

    0

    Posted April 29th, 2008 00:00

    Interestingly enough I ran Windows (Vista) update and wadda ya know there was an update for the integrated graphics card AND the monitor (which is rare) and while it's not perfect it is considerably better after the update.

     

    It wasn't even checked by default, I read through the desriction of every update and came acrross these two. Hopefully this will help someoe else coming across this issue.

     

    Thank lpprikej for all the help!

  • lpprikej

    650 Posts

    322

    0

    Posted April 29th, 2008 11:00


    @zete605 wrote:

    Interestingly enough I ran Windows (Vista) update and wadda ya know there was an update for the integrated graphics card AND the monitor (which is rare) and while it's not perfect it is considerably better after the update.

     

    It wasn't even checked by default, I read through the desriction of every update and came acrross these two. Hopefully this will help someoe else coming across this issue.

     

    Thank lpprikej for all the help!


     

    wow thats kool.  its np, i am glad it is better looking now  :)