
Solved!
Go to SolutionHow do I access OptionRom?
Hello,
I migrated my SSD and my 2TB HDD with Intel Rapid Storage Technology on my new Alienware X51 R2 on Windows 8. This was a mistake. Basically, I want to "un-migrate" the drives and put them back to how they were, reinstalling Windows if necessary. Right now, my computer just shows the one migrated drive and Intel Rapid STorage Tech shows both under one volume. I keep reading that in order "restore" I need to access Option Rom during startup. I have been pressing Ctrl-I but nothing comes up and I dont see anything Intel Related pop up. I checked my BIOS and everything seems fine on there too. Please help. I have tried everything.
Thank you,
Carlos
Responses (2)
Solutions (0)
If under warranty, call support.
If you haven't created a Dell Recovery flash drive yet, I would. It's the only way to clean-install Windows-8 if you have to. You might also have to get additional restore media from Dell.
You should also straight-file-copy any important data files to a separate USB storage device.
Migrate? You mean RAIDed drives together? Normally, you can't un-RAID drives. You can:
1. Clean Install
2. You can usually create a full backup Image of your RAIDed C: drive, un-RIAD the drives in BIOS, and bare-metal restore that Image to the now-stand-alone SSD C: drive.
Can't walk you through it step-by-step because I don't have x51 R2 or even mess with Intel RAID on desktops.
That BIOS hot-key should work. Sometimes there is an option in normal BIOS to even allow that hot-key-combo or allow (out-of-OS) RAID config display.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.

animaus
6 Posts
1143
1
Posted July 21st, 2013 05:00
Thanks for assisting! I ended up unplugging the drives and plugging them back in. This forced the computer to boot up into Intel's Option Rom directly, which allowed me to delete the partitions and re-create them each for each drive. It's weird that the X-51 R2 has no access to that part of the BIOS unless I did that. Thanks again.