JS92

updated

7 years ago

J

JS92

3 Posts

0

11584

June 8th, 2019 21:00

Latitude E7450 heatsink not covering cooling surfaces

Hi everyone, 

I recently encountered a strange thing in my Latitude E7450 laptop with i5 processor. After 3 years it was running a hot when performing easy tasks so I decided to change the thermal paste. When doing so I noticed that there were 2 cooling surfaces under the heatsink, but the heatsink only lined up to connect with one of them. The other one is located beside it, so no thermal paste can be applied to it (and wasn't). Please see my pics as a reference. In the pics I flipped the heatsink upside down, but you can clearly see how it aligns with the screws, and that it "misses" one of the cooling surfaces. 

Since it looks this way I assume it should be this way? But why have a cooling surface that is not connected to anything? Btw the E7450 chassis gets really hot at the fan area, but I have read this in reviews also and it seems like it's supposed to be that way. 

Also it's clear that the heatsink is wide enough to cover both of the surfaces, and it would seem more logical to me if it were mounted so it covered both of them. I know this laptop has not been altered in any way before I received it, so it has to have been this way from the factory. 

 

DSC_0354.JPG

 

DSC_0355.JPG

After applying the paste to the rightmost cooling surface and assembling the laptop, it runs up to 80 degreed C while surfing the web. see pic. temp.PNG

Thanks for your help, I'm confused here :/

//

  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    8343

    1

    Posted June 11th, 2019 07:00


    @JS92 wrote:

    Thanks, 

    So I do have the correct heatsink? 

    Thanks

    //JS


    @JS92 you have the original heatsink that shipped with the system. If you intend to replace it go with the redesigned version.

    Alan

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    8412

    0

    Posted June 9th, 2019 03:00

    Welcome to the Dell Community  @JS92 

    That is not the heat-sink for that CPU.

    You need this one:

    Heat-Sink.PNG

    Dell part number: H0WK4

    Please use your "Service Tag" to look up your system configuration.

    https://www.dell.com/support/home/us/en/04/product-support/product/latitude-e7450-ultrabook/configuration

    Please post back with the "Heat-Sink" part number and the "CPU" model number???

    Best regards,

    U2

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    4514

    0

    Posted June 11th, 2019 04:00

    @JS92 

    Any update???

    Regards,

    U2

  • JS92

    3 Posts

    8363

    0

    Posted June 11th, 2019 06:00

    Thank for your response. The number is 7Q11F72. I did not find any of the information that you asked for on the link that you sent. I looked in the configuration and spare parts sections. Furthermore there is another thread here on Dell in which someone claims that it should be that way, for some reason only one chip should be covered. Here: https://www.dell.com/community/Laptops-General-Read-Only/E7450-heat-sink/td-p/5054994

    I am starting to think that it should actually be this way, although it is very strange and looks wrong. Also I read these models are known for running hot so maybe it is designed that way. 

    Best regards

    //

  • JS92

    3 Posts

    8349

    0

    Posted June 11th, 2019 06:00

    Thanks, 

    So I do have the correct heatsink? 

    Thanks

    //JS

  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    8362

    1

    Posted June 11th, 2019 06:00


    @JS92 wrote:

    Thank for your response. The number is 7Q11F72. I did not find any of the information that you asked for on the link that you sent. I looked in the configuration and spare parts sections. Furthermore there is another thread here on Dell in which someone claims that it should be that way, for some reason only one chip should be covered. Here: https://www.dell.com/community/Laptops-General-Read-Only/E7450-heat-sink/td-p/5054994

    I am starting to think that it should actually be this way, although it is very strange and looks wrong. Also I read these models are known for running hot so maybe it is designed that way. 

    Best regards

    //


    Hi @JS92 the information that you have linked to is correct and the explanation of why is explained in the post. The heatsink was redesigned so that the north bridge would not be making contact with the heatsink. Whereas the part in your system is correct, it's the original part that shipped with the system. The part number that you require for the revised heatsink is TW22Y.

    Alan

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    8353

    0

    Posted June 11th, 2019 06:00

    @Dell-Alan D 

    Thank you for explaining the initial design flaw and the followup redesign of the heat sink.

    Regards,

    U2

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    8341

    0

    Posted June 11th, 2019 07:00

    @Dell-Alan D 

    My warehouse tech's process around 100+ of these units a month.

    Is there a quick way to tell if they have the poorly designed heat-sink without removing it to check???

    And is there any exchange policy for the same???

    Regards,

    U2

  • tadream

    3 Posts

    4627

    0

    Posted June 11th, 2019 09:00

    Hi all!

    Dell-Alan D, how would one know there was a part redesign that would benefit system health and customer satisfaction? I mean for any Dell product...

    Thanks

     

     

     

  • Dell-Alan D

    4 Apprentice

    •

    1159 Posts

    6378

    0

    Posted June 12th, 2019 01:00


    @U2CAMEB4ME wrote:

    @Dell-Alan D 

    My warehouse tech's process around 100+ of these units a month.

    Is there a quick way to tell if they have the poorly designed heat-sink without removing it to check???

    And is there any exchange policy for the same???

    Regards,

    U2


    @U2CAMEB4ME I cant think of an easy way to check other than checking the service tag on the support tag and checking the heatsink part number on the components list.

    A warranty exchange would only be made if the system is exhibiting thermal issues although with the age of the xx50 systems I would expect the majority of them would be out of warranty by now unless they were purchased with a 5 year warranty. 

    Alan