UNSOLVED

Precision2022

updated

5 years ago

0

622

March 15th, 2022 12:00

Dock w/KVM switch between Precision 7820 and Latitude 7480

Already using D6000 with two DP monitors on a Latitude 7480, and it works great.  I couldn't be more pleased with it, for home use.

However, now I need to add my new Precision 7820 workstation (tower, not laptop) to the mix, used for 3D modeling and simulation.  I would like a solution that allows me to toggle my wireless keyboard, mouse, dual monitors and Ethernet between the Latitude and Precision in a single action.

Although I'm doing 3D modeling on the Precision, I don't believe the graphics requirements are extreme, I've always been fine with pretty modest 3D cards (eg. Quadro P2000).  This isn't high-speed gaming graphics.

I've seen some talk about placing a USB 3.0 switch between the D6000 dock and the two PC's, but then others say it's not possible.  I don't understand why.  I don't mind supplying supplemental power to the Latitude, to keep it alive or charging, when the dock is toggled over to the Precision.

Help set me straight?

Thanks!

  • 367

    0

    Posted March 15th, 2022 12:00

    I should have added, one product I had seen was Plugable Sharing Switch (USB3-SWITCH2), which claims it can toggle an entire dock between two PC's.

    Also, I'd probably run a separate Ethernet cable direct to the Precision, but use the D6000 for Ethernet connection to the laptop.

     

     

  • ZimmerC

    12 Posts

    346

    0

    Posted March 16th, 2022 02:00

    Also, I'd probably run a separate Ethernet cable direct to the Precision, but use the D6000 for Ethernet connection to the laptop.

    DELL, 210-AKFI, Dell Latitude 7480 (210-AKFI) ... USB 3.0/ESATA DUAL HDD/SSD DOCK W/ UASP Easily connect and swap two 2.5 or

  • ZimmerC

    12 Posts

    334

    0

    Posted March 16th, 2022 22:00

     Pay My Doctor  laptop built for ultimate productivity and performance. Featuring top of the line security features and flexible docking options.

  • 328

    0

    Posted March 17th, 2022 05:00

    I actually went a different direction.  Rather than placing a switch between the dock and two computers, and having to put the Precision 7820's video thru DisplayLink, I put a dual-DisplayPort KVM between the the D6000 and the Precision 7820.  In other words, the dock stays always connected to the Latitude 7480, and I'm switching downstream of that.

    Here's the KVM I chose:

    https://www.amazon.com/gp/product/B09SHDHCFJ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

    We'll see how it works, expecting to set up on Saturday.