
UNSOLVED
Closed
M
MatthiasJKoch
1 Message
0
3731
April 4th, 2018 15:00
Configuration of Active Pen PN557W on Latitude 5289
Dear all,
I am trying to configure the Dell Active Pen PN557W on the 2-in-1 Laptop Dell Latitude 5289.
The built-in Windows Control Panel for "Pen" includes some configuration opportunities for the top button, but neither for the top barrel button nor for the bottom barrel button.
In addition I installed the Dell driver for the PN557W. This one includes additional configuration options for the top and the bottom barrel button.
The blue tooth pairing seems to work even though the white LED light does not always seem to flash when expected.
Nevertheless, it is not clear, which of the configuration options is leading and how the internal windows configuration refers to in comparison to the DELL driver configuration options. Both can be configured separately without knowing the relationship.
I would like to use the DELL driver as the leading configuration option, but it does not seem to work like this.
The following effects can be seen:
If the configuration of the top button under Windows differs from the one with DELL, nothing at all happens when pressing the top button once, twice or longer.
Changes made in the configuration for the top and bottom barrel button under the Dell system seem to follow the instructions with some delay.
Please let me know, how the configuration of the top button can applied according to the Dell configuration options. How can the Windows configurations in general or specifically for the top button be abandonned? How can be defined that the Dell configuration is the leading configuration?
Best regards,
Matthias
This conversation is no longer open for comments or replies and is no longer visible to community members.
Responses (4)
Solutions (0)
I just did some tests on my system, Dell Latitude 5285 with PN557W and came to the same conclusion - the Windows settings override the driver application settings. I tried using the Dell and the Wacom Feel driver/configurator. When I set the Windows configuration to do nothing but have the Wacom or Dell set to do something, nothing happens. What are you trying to have the stylus buttons do?
I also have a PN557W (labeled as PN556W, curiously) which was purchased directly from Dell in late June with a Latitude 5290 2-in-1. It certainly appears to be a 557W and the top button is flush with the body of the pen. I have yet to get it to do anything useful at all.
It seems to be paired to my Latitude 5290, and pairing it worked as expected, but no button push gets a response from the 5290. When I downloaded the Active Pen Control Panel dated 4/5/18 from Dell, the version I get does not offer any top button configuration options, only the bottom button (up and down) and the image shown was actually of a 556 with a clip. When I downloaded the OS Deployment version (3/29/18), as directed in the current User Guide on the Dell website, I get an image of a Bamboo stylus with options for a top barrel button and bottom barrel button, but again, not what is shown in the User Guide.
Any ideas? It does not seem that this pen was designed to work with the 5290 (even though it is shown as compatible) or the drivers and User Guides posted as current are not. All I really want to use the pen for is to complete forms and record signatures on MS Word documents using the inking feature.
WeirdStrangeWange
1 Rookie
•
18 Posts
1779
0
Posted May 24th, 2019 11:00

Robert P (retired)
6 Operator
•
9396 Posts
3663
0
Posted April 5th, 2018 04:00
Hi MatthiasJKoch,
Thanks for posting. Apologies that your device is not functioning as expected.
From the information I can find, it's suggested that the KB2968599 update from Microsoft will help to resolve this issue.
There is a product support page available here:
Support for Dell Active Pen - PN557W
Robert P (retired)