UNSOLVED

isilon1

updated

9 years ago

I

isilon1

2 Posts

0

925

January 15th, 2018 09:00

Isilon 7.2.1.5 to 8.1.0.1 upgrade quest on 9 nodes (3xS200/3xX200/3xNL400)

Customer does not want to do a tech refresh at this time of his 9 nodes. At some point in past it was upgraded from 7.0.1.10 (B_7_0_1_233 (releas) to OneFS v7.2.1.5. Can this single cluster of 9 nodes (3x S200 with 300gb sas, 3x X200 with 500gb sata, 3x NL400 with 1TB sata) be upgraded to onefs 8.1.0.1? (i know it will be parallel upgrade and not rolling from 7.2.1.5 to 8.1.0.0 but will S200 support 8.x?). If yes, am thinking to do parallel upgrade to 8.1.0.0 and then to 8.1.0.1. Any pointers? Thanks

  • AdamFox

    254 Posts

    411

    0

    Posted January 16th, 2018 06:00

    The S200 platform can definitely run 8.x.   I've run it for years in my lab.

    However, keep in mind that 8.1.x is still a DA release as of today and should only be applied under the following conditions:

    1. It's a non-production system for testing (like a lab to qualify a release)

    2. There is a plan to add Gen6 HW to the system in the very near term as 8.1.x is required for Gen6.

    The recommended 8.x release today for a Gen4 cluster would be 8.0.0.5 unless your cluster meets one of the two conditions above.  You will not lose any functionality by being on this release vs 8.1.x.  I would expect a GA and later a target release for 8.1.x later this year, but those timelines are based on reaching certain metrics so I can't know for sure exactly when at this point.

    Hope this helps.

  • isilon1

    2 Posts

    411

    0

    Posted January 16th, 2018 07:00

    Thanks Adam. Spot on

    **

    Sent from my iPhone