how to check if all Isilon nodes are allowed to reach the ESRS server
Hi all,
Currently we are using ESRS server,we are planning to change the server , So before that we want to know that if all Isilon nodes are allowed to reach the ESRS server or not.Could please help me on this
isilon-1: 1 packets transmitted, 1 packets received, 0.0% packet loss
isilon-2: 1 packets transmitted, 1 packets received, 0.0% packet loss
isilon-3: 1 packets transmitted, 1 packets received, 0.0% packet loss
Of course that just checks whether ICMP traffic is permitted, you could substitute in perhaps a CURL command instead of ping, and specify the port number to be more specific about your attempt.
s940n0210-1: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-2: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-3: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-4: ping: sendto: No route to host
s940n0210-4: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-5: ping: sendto: No route to host
s940n0210-5: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-8: ping: sendto: No route to host
s940n0210-8: 1 packets transmitted, 0 packets received, 100.0% packet loss
s940n0210-1#
Whereas our current ESRS server ip addrees is Y but we got mail emc to change for ip addrss is X.when i have seen in oneFS ESRS tap.. I can see only Y is enabled .we dont have secondary ESRS.
Below is EMAIL from EMC:
I can see that that both Isilon systems are doing her Callhomes already via the old (Y) ESRS Server.
Due to this ESRS backend will be shutoff in the end of the month I wanted to change the callhomes to the new ESRS server (X).
But I cant see that the mails are coming to this server.
Can you please check if all Isilon nodes are allowed to reach the ESRS server (X) with the following ports, please:
And if this is not allowed, please request to get all these rules be applied.
X-new IP address
Y-old IP address.
Kindly suggest me chris ,how to do all these checks.
crklosterman
450 Posts
1938
0
Posted April 23rd, 2018 09:00
So you're just trying to see if all the nodes can get to the ESRS gateway?
(As-in there is a firewall in the middle, and you want to verify that the rules are all correct?)
You could do something simple like this:
isilon-1# isi_for_array -s "ping -c 1 <> | grep loss"
isilon-1: 1 packets transmitted, 1 packets received, 0.0% packet loss
isilon-2: 1 packets transmitted, 1 packets received, 0.0% packet loss
isilon-3: 1 packets transmitted, 1 packets received, 0.0% packet loss
Of course that just checks whether ICMP traffic is permitted, you could substitute in perhaps a CURL command instead of ping, and specify the port number to be more specific about your attempt.
~Chris