Samsung Evo Plus NVMe M.2 SSD 2TB Not showing after installed.
Laptop Details: - Dell Inspiron 17 7000 series.
SSD Details: -
Samsung 970 EVO PLUS
NVMe M.2 SSD 2 TB
hello dear community, I just bought above mentioned SSD for my Above-mentioned Laptop. I remove my laptop's back part and installed the SSD Correctly. but it didn't show anywhere in my laptop, how can I able to make it show and work properly. Please help me out in this matter.
It's not an NVMe port -- it's an M.2 port that's wired to a SATA controller. This system dates to a time when NVMe drives were brand new and limited to high-end gaming and workstation-class systems. It took a couple of years longer for NVMe to enter the mainstream, consumer-grade notebook market.
There were also systems that could take either M.2 SATA or M.2 NVMe in the years after this model was released. This system dates from late 2016 -- full NVMe support in mainstream systems started to become more common in 2018.
It's possible that the Samsung 970 EVO PLUS NVMe M.2 SSD 2TB is not initialized or formatted, which is why it's not showing up on your Dell Inspiron 17 7000 series laptop. To make it work properly, you can follow these steps:
1- Open "Disk Management" on your laptop by right-clicking on the Start button and selecting "Disk Management."
2- Look for the new SSD in the list of drives. It should be displayed as unallocated space.
3- Right-click on the unallocated space and select "New Simple Volume."
4- Follow the wizard to create a new partition and format the SSD with a file system (typically NTFS) and assign a drive letter.
Once this process is complete, your Samsung SSD should be recognized and ready for use on your laptop.
but my system is not that old. I'm using Dell Inspiron 17 7000 series. Core i7 7th Gen. 16GB Memory 256GB SSD. Touchscreen Display. r u sure it's still didn't match the requirements to work with my system? waiting for your reply.
Yes, I'm sure the system has no NVMe support. Pull the drive you have (or look up the model number in the device manager) and you'll see it's a SATA drive. This system dates from 2016, so it is on the order of seven years old. And while NVMe drives did exist in 2016, support for them was limited to workstation-class (Precision) and gaming (Alienware) systems -- it wasn't until 2018 that NVMe drives entered the consumer-class notebook market (aka Inspiron models).
Your system does not support, nor can it be made to work with an NVMe drive -- you need to return the drive you've purchased, and order an M.2 SATA drive. They still exist in the market, though you're likely to find that a 2T SATA M.2 drive is over $200 due to the limited market, while a 2T NVMe drive is half that or slightly more.
The other alternative is to skip M.2 altogether and just use a 2.5" SATA notebook drive, which will no doubt be less expensive.
Either way, you cannot use an M.2 NVMe drive in an Inspiron 7779, period.
Explain what? That you've plugged in a drive that physically fits the system but is electrically incompatible with the SATA controller that manages the drive?
ejn63
12 Elder
•
31849 Posts
•
156277 Points
0
1
Posted October 1st, 2023 15:07
This system is SATA-only -- it has no NVMe support. You will need an M.2 SATA drive.