Inspiron 5505 precision Touchpad not clicking or respond to gestures.
I have purchased a few days ago from Dell outlet an inspiron 5505 with Ryzen 7 and the precision touchpad is not responding to left/right clicks or gestures, I can only move the cursor.
I have searched for possible solutions online:
1) Uninstalling driver from the device manger and restarted, same issue.
2) Run diagnostics with support assist, no issues.
3) Run main diagnostics on bootup, still no issue. Touchpad showed as installed and connected with the internal cable.
4) I have made all driver updates possible with support assist and windows updates and I am on Windows 10 20H2 with BIOSv1.3 still didn't resolve the issue.
5) I changed settings on windows for the touchpad, I have minimise/maximise sensitivity, turned it off/on, and reset it, still nothing.
6) Tried to re-install windows, touchpad didn't work even on installation process with windows 10 ver. 1908 and 2004.
7) After that, I tried to boot on a flash drive with ubuntu linux and the gestures were working properly only clicking the left and right corner of the touchpad didn't work.
I searched on dell support for touchpad drivers for my model but there was nothing.
Does anyone else have the same issue with this device or have any idea what is the cause of this issue? I am not sure if it is a hardware problem because gestures did work with ubuntu.
I found the problem. It has something to do with the back cover of the laptop. If you recently open up your laptop, try removing all the screws again and don't put it back. Turn on the laptop and see if the problem of the touchpad is gone. If it fixes your problem, try putting back the screws one at a time and try not to tighten it too much. Check every time you put a screw in to make sure it's not affecting your touchpad. I guess the screws are too tight and it causing problems with the touchpad? I hope this help.
Update November 11, 2020 = A DELL-Cares agent setup the Return to Depot repair service. Update December 14, 2020 = The faulty parts had been replaced and the issued has been resolved. Elef224
I haven't tried the screw thing. I'll do that tomorrow. Thank you!
For me I've found that the touchpad gets stuck in the down position when I push down to click. There is no repeatable way to get it to unclick, but eventually comes back... sometimes. I've turned on the tapping feature and that is working great as long as it does not get stuck.
bjk
2 Posts
2819
1
Posted November 28th, 2020 09:00
Hi Elef224,
I found the problem. It has something to do with the back cover of the laptop. If you recently open up your laptop, try removing all the screws again and don't put it back. Turn on the laptop and see if the problem of the touchpad is gone. If it fixes your problem, try putting back the screws one at a time and try not to tighten it too much. Check every time you put a screw in to make sure it's not affecting your touchpad. I guess the screws are too tight and it causing problems with the touchpad? I hope this help.
Update November 11, 2020 = A DELL-Cares agent setup the Return to Depot repair service.
Update December 14, 2020 = The faulty parts had been replaced and the issued has been resolved.
Elef224