UNSOLVED

Cokcsy

updated

9 years ago

Closed

C

Cokcsy

27 Posts

1

10126

April 8th, 2018 11:00

Inspiron 15 5578 2-in-1 very slow to POST after BIOS update & windows update crash

Hi,

 

I've got a 2-in-1 Inspiron 5578 that is just over a year old (and therefore out of warranty). It just had a BIOS update (to version 1.23.3), and at the same time it tried to do a Windows 10 update. Unfortunately they were not compatible and it wouldn't boot. I used the Dell inbuilt recovery tool to recover the laptop and it boots into Windows now however, there is a major issue.

When booting, it takes about 20 seconds from power on to the "Dell" windows booting logo / screen; it used to jump to that almost immediately. I've had a quick look in the UEFI / BIOS and made sure quick boot etc is on, and even loaded the default and as installed settings, but to no avail. It also fails to sleep / hibernate too sometimes, and ends up rebooting when it should be just waking up.

Can anyone help me work out what is causing the slow POST, and random crashes so I can get it back to the quick boot it used to do? I'm happy to reimage / reinstall as necessary to get back my nice quick laptop!

Thanks in advance.

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • Cokcsy

    27 Posts

    9141

    1

    Posted April 8th, 2018 12:00

    I just timed it and it took over *40 seconds* from leaving the BIOS until the Dell logo comes back on screen as part of the boot. Something is not right.

    Does the POST read the hard drive for data at any point before starting to boot? Is there any way I complete re-image might fix this, or is it a setting in the BIOS that has got messed up somehow?

    Also, I ran the diagnostics and there were no errors.

  • Cokcsy

    27 Posts

    9100

    0

    Posted April 10th, 2018 12:00

    Anyone able to help at all?!
  • Cokcsy

    27 Posts

    9059

    0

    Posted April 13th, 2018 11:00

    So I tried to downgrade the BIOS to the previous released version and it won't complete, but doesn't throw up any errors at all. I have enabled the option in the BIOS to allow downgrading, and have tried from within widows, from USB DOS and from the boot option, and non of them work: it starts to load, seems to be going fine, reboots, but always stays on the current version.

     

    Any ideas?!

  • Cokcsy

    27 Posts

    9041

    0

    Posted April 14th, 2018 14:00

    Hmmmm... doing some googling, it appears there is no way to downgrade de to the "Spectre / Meltdown" issue - although it never comes up with any errors - it just reboots and stays at 1.23.3.

    I've now tried completely wiping the hard drive, removing all the partitions and installing a fresh version of Windows 10 from the MS website without any of the Dell partitions etc.... but still no luck - its taking anywhere between 40 second and a minute to POST.

    Is there no-one who can help me...??!!
  • Cokcsy

    27 Posts

    9037

    0

    Posted April 14th, 2018 15:00

    something more odd is now happening - if I set the BIOS up to boot using UEFI (not legacy), it doesn't boot into windows and immediately goes into the support assist ePSA thing to run diagnostics (which find no errors).

    The bottom line is that I now can't seem to get it to boot into Windows 10 using UEFI - I have to boot using the legacy option.
  • LSUFAN51

    6 Operator

    •

    6519 Posts

    •

    26687 Points

    9030

    0

    Posted April 14th, 2018 17:00


    @Cokcsywrote:
    something more odd is now happening - if I set the BIOS up to boot using UEFI (not legacy), it doesn't boot into windows and immediately goes into the support assist ePSA thing to run diagnostics (which find no errors).

    The bottom line is that I now can't seem to get it to boot into Windows 10 using UEFI - I have to boot using the legacy option.

    You check SATA operation is set to AHCI and secure boot is enable in the BIOS ?

    Also, you reset BIOS to defaults to see if it will make any difference?

    How to restore the BIOS (System Setup) defaults on a Dell Product

    http://www.dell.com/support/article/us/en/19/sln245206/how-to-restore-the-bios-system-setup-defaults-on-a-dell-product?lang=en

    Please click on the link below for additional information that might be helpful to you.

    How to Fix a Boot Up Problem (Official Dell Tech Support)

    https://youtu.be/uJcqHY7YbmA?list=PLdLDGmnHB07NVpbsbTGeiW-NLjpVZufxB

  • Cokcsy

    27 Posts

    9004

    0

    Posted April 15th, 2018 05:00

    Hi LSUFAN51,

    Thanks for the post. I've checked the SATA is set to AHCI, but I couldn't get secure boot to work as it needs UEFI to be turned on, and when i did that it wouldn't boot into Windows. So I decided to try the Dell OS Recovery Tool and its in the middle of the rebuild now - it seems to be working fine, so not quite sure how I managed to mess that up!

    With respect to the BIOS slow to boot / POST issue, I searched through the forum and found this thread which is similar in that it won't let the user downgrade to a previous version, although theirs comes up with an error - mine just reboots with no error at all.

    I have reset the BIOS to the default settings, both the "factory" and the "BIOS default" settings - neither option has helped the slow boot issue (but has sorted the booting in UEFI mode).

     Any ideas what could be causing the slow BIOS POST?

  • LSUFAN51

    6 Operator

    •

    6519 Posts

    •

    26687 Points

    8993

    0

    Posted April 15th, 2018 08:00

    The boot time is still around 40 seconds or more after reinstalling windows 10?

    EDIT / Dell BIOS Updates:

    www.dell.com/support/article/us/en/19/sln129956/dell-bios-updates?lang=en#Issue7

    When a PC is first started, BIOS activates all of the basic hardware required to startup or boot to the operating system including but not limited to:

    • Chipset
    • Processor and Cache
    • System Memory / RAM
    • Graphics and Audio Controllers
    • Keyboard and Mouse
    • Internal Drives
    • Network Controllers
    • Internal Expansion Cards

      

  • LSUFAN51

    6 Operator

    •

    6519 Posts

    •

    26687 Points

    8989

    0

    Posted April 15th, 2018 09:00

     " I just timed it and it took over *40 seconds* from leaving the BIOS until the Dell logo comes back on screen as part of the boot "

    My apologies. I went back and read your posts again, I thought you were preferring to powering on the system to the Dell logo as to the slow boot time. Unfortunately I don't know the answer to your question. Hopefully someone  with knowledge of this problem or a Dell rep will charm in and help answer your question.

  • Cokcsy

    27 Posts

    3678

    0

    Posted April 15th, 2018 09:00

    No worries! Yeah, the boot time once it gets past POST is fine; it just seems to be stalling before finishing the POST...

    Is there any way to force a BIOS downgrade somehow so I can check the previous version... Or even a way to force a reinstall of the current version?