I ran Dell Pre-Boot Diagnostics and all tests passed successfully.
Result Code: 2000-0000 (Pass)
The audio test in Dell Diagnostics successfully plays sound through the laptop speakers, which suggests that the speakers and audio hardware themselves are functioning correctly.
Additional Information
I have also experienced several:
DPC_WATCHDOG_VIOLATION (0x133) BSODs
Troubleshooting Already Performed
Multiple system restarts
Reinstalled Realtek Audio Driver
Updated NVIDIA Graphics Driver
Updated Intel Rapid Storage Technology Driver
Ran Dell Diagnostics successfully
Scanned for hardware changes
Confirmed Realtek Audio repeatedly enters Code 45 state
Confirmed speakers work during Dell Diagnostics
Device Information
Running:
pnputil /enum-devices /class Media
shows:
Realtek(R) Audio Status: Disconnected
when the issue occurs.
Questions
Has anyone with a Dell G15 5530 experienced:
Realtek Audio randomly becoming Code 45?
Audio working after reboot and then failing later?
Speaker icon appearing normal but producing no sound?
Realtek Driver installation failing with Error 0xE000020B?
DPC_WATCHDOG_VIOLATION crashes related to audio drivers?
Any advice, known fixes, recommended driver versions, chipset updates, BIOS updates, or similar experiences would be greatly appreciated.
The most common fix for Realtek install error 0xE000020B is to increase Windows’ device driver installation timeout, then reinstall the driver. A second common fix is to remove old/conflicting audio drivers and install the correct Realtek package for your motherboard or PC model.
Try this first
Open Device Manager and uninstall any old Realtek/audio devices if present.
Check Delete the driver software for this device when offered.
Restart the PC.
Download the Realtek audio driver from your PC or motherboard maker, not a random third-party site.
Run the installer again, ideally as administrator.
Increase install timeout
Windows may be timing out during driver installation. The fix published for this Realtek error is to enable Configure device installation time-out in Group Policy and raise it from the default 300 seconds to 1800 seconds, then retry the install.
If it still fails
Turn off antivirus temporarily during the install, then re-enable it afterward.
In Device Manager, use View > Show hidden devices and remove any yellow-banged unknown or audio devices before reinstalling.
Make sure you choose the driver that matches your exact Windows version and motherboard model.
If the installer came as a ZIP, extract it fully first and run the setup from the extracted folder.
Fastest safe path
For most people, the best sequence is: uninstall old audio drivers, restart, download the correct OEM Realtek driver, increase the driver timeout if needed, and reinstall as administrator.
@Bhavdip pandya I’d suggest contacting Windows/Microsoft customer support and asking them to help reinstall the audio driver. If the issue still persists, especially with freezing and restarts, there’s a chance the speakers or audio hardware may have a physical problem. In that case, I’d recommend getting it checked by Dell.
Finally found the solution to the Realtek audio Code 10 issue on Dell G15 5530
After a BIOS update, my internal Realtek speakers stopped working and the Realtek(R) Audio device either disappeared or showed Code 10 – “Device Timeout. The specified I/O operation was not completed before the time-out period expired.”
I spent months continuously researching and troubleshooting this issue, including Windows reset/reinstallation, Dell’s official Realtek Audio driver (6.0.9844.1), Device Manager/PnP troubleshooting, and Dell pre-boot diagnostics.
The important finding was that Dell F12 Diagnostics passed all 6 speaker frequency tests, so the physical speakers/audio hardware were working correctly.
The Realtek device was detected with this Hardware ID:
BIOS → Connection → Network Controller Configuration → Integrated NIC
It was set to “Enabled with PXE.” I changed it to “Enabled.”
After saving the BIOS setting and booting into Windows, the Realtek audio started working again and the Code 10 error disappeared.
So if other Dell G15 5530 users experience the same Realtek Code 10 / Device Timeout issue after a BIOS update, it may be worth checking the Integrated NIC / PXE setting before reinstalling Windows or repeatedly removing/reinstalling Realtek drivers.
I hope Dell can investigate this BIOS/NIC/PXE interaction and address it in a future BIOS update, because I spent months trying to identify the cause when the actual solution was a BIOS network setting.
anne_droid
6 Operator
•
2631 Posts
•
9681 Points
0
0
Posted June 7th, 2026 12:19
Hi
Dunno.
I did put the query thru a LLM and got this....
The most common fix for Realtek install error 0xE000020B is to increase Windows’ device driver installation timeout, then reinstall the driver. A second common fix is to remove old/conflicting audio drivers and install the correct Realtek package for your motherboard or PC model.
Try this first
Open Device Manager and uninstall any old Realtek/audio devices if present.
Check Delete the driver software for this device when offered.
Restart the PC.
Download the Realtek audio driver from your PC or motherboard maker, not a random third-party site.
Run the installer again, ideally as administrator.
Increase install timeout
Windows may be timing out during driver installation. The fix published for this Realtek error is to enable Configure device installation time-out in Group Policy and raise it from the default 300 seconds to 1800 seconds, then retry the install.
If it still fails
Turn off antivirus temporarily during the install, then re-enable it afterward.
In Device Manager, use View > Show hidden devices and remove any yellow-banged unknown or audio devices before reinstalling.
Make sure you choose the driver that matches your exact Windows version and motherboard model.
If the installer came as a ZIP, extract it fully first and run the setup from the extracted folder.
Fastest safe path
For most people, the best sequence is: uninstall old audio drivers, restart, download the correct OEM Realtek driver, increase the driver timeout if needed, and reinstall as administrator.
~~~~~~
But it may be wrong or not relevant.
Kind Regards
anne_droid