UNSOLVED

wiscoguy

updated

3 months ago

W

wiscoguy

1 Rookie

•

7 Posts

•

5 Points

0

829

August 30th, 2025 13:55

Pro Max Tower T2 FCT2250, RTX 5090

Hi all,

I got a FCT2250 with a RTX 5070 installed, and trying to upgrade to an RTX 5090.

The provided cable however, is not enough to power the latter (the cable plugs into 1x6-pin and 1x8-pin headers of the PSU; out of 2x6-pin +2x8-pin available). 

Anybody has an advice with running a 600W card on this system? Since I don't know the pinout config out of the PSU, I don't know if any of the configs for other PSUs (see e.g. https://store.cablemod.com/product-category/cablemod-basics/cb-12vhpwr/) might work ...

(edited)

  • KhanhTuong

    1 Rookie

    •

    13 Posts

    •

    31 Points

    4

    0

    Posted May 2nd, 2026 16:07

    Have you installed it yet?
    I have the same idea as you. Can you show me a picture?

  • dummy

    2 Intern

    •

    108 Posts

    •

    109 Points

    4

    0

    Posted July 24th, 2026 02:52

    @KhanhTuong​ and @wiscoguy The v2 1500 W PSU came with the 12v PWR Cable for the RTX 5090. Here's my install in the clip.

    1 Attachment

  • wiscoguy

    1 Rookie

    •

    7 Posts

    •

    5 Points

    3

    0

    Posted July 24th, 2026 04:22

    Thank you so much for the video! One last question: can you see if that cable connects to 2 slots on the power supply, or 4?

  • dummy

    2 Intern

    •

    108 Posts

    •

    109 Points

    2

    0

    Posted July 24th, 2026 10:40

    @wiscoguy​ You're welcome. 2 slots on the PSU, and then the cables are joined. That is essentially what I did when I had the RTX 5090 FE installed in the previous machine (Precision 3680). On the Precision, I had to change the PSU because from the factory it had only a 500W PSU. So I changed it to a 1350 W PSU, which came with the A13, as very well detailed in this post (here it shows how the 2 cables are then joined:

    https://www.reddit.com/r/Alienware/comments/128ivl7/dissecting_the_r13_psu_750w_1000w_r15_1350w/


    2 Attachments

  • dummy

    2 Intern

    •

    108 Posts

    •

    109 Points

    4

    0

    Posted July 25th, 2026 03:30

    Close-up pics of the PSU connections on the Dell ProMax Tower T2 with RTX 5090FE.

    2 Attachments

  • dconnelly

    1 Rookie

    •

    6 Posts

    •

    20 Points

    4

    0

    Posted August 24th, 2026 05:29

    @dummy​ I just got a Pro Max T2 but the included 12VHPWR connector is too chunky to fit the angled 5090 FE connector plug. Do you know if a straight through 12VHPWR connector exists for the dell 1500w PSU? Or do you happen to have the cable part number (too difficult to read from image)?

    (edited)

  • dummy

    2 Intern

    •

    108 Posts

    •

    109 Points

    0

    0

    Posted August 24th, 2026 07:38

    @dconnelly, from the packing slip:

    Graphic cable of Dual 6+2 Pin Y5P4K

    Dell Pro Max Tower T2 with 1500W Power Supply (80 Plus Platinum) DJY78

    This is v.2 of the PSU

    Cable on Dell Parts store:

    Manufacturer part WP5KN | Dell part 470-BFHF | Order Code 470-bfhf

    https://www.dell.com/en-us/shop/graphic-power-cable-dongle-12-4-pin-to-dual-6-2-pin/apd/470-bfhf/pc-accessories

    I did not change the cable. The OEM Dell cable fit perfectly into the angled power slot of the RTX 5090FE.

    (edited)

  • dconnelly

    1 Rookie

    •

    6 Posts

    •

    20 Points

    0

    0

    Posted August 24th, 2026 18:38

    Thanks, that's exactly what I needed. One more small favor if you don't mind: on the 12VHPWR cable itself there's a little white label with a 2D barcode (it's visible in your PSU connector photo). Under the barcode there should be printed text in Dell's CN-0XXXXX-YYYYY-ZZZ-ZZZZ-A00 format. Could you read me the full string, including the trailing revision code?

    My cable is the same 8+6-to-12+4 600 W cable but with a right-angle plug, which won't seat in the 5090 FE's recessed socket, but yours is straight, marked 600W and R. My Dell outlet Pro Max T2 seems to be a TAA build, yours doesn't look like one, so I'm trying to work out whether the straight version is a separate part number or just a later revision so I can order it. Also worth knowing: does your connector have any other marking on it besides 600W and R?

    Thanks!

    (edited)

  • dconnelly

    1 Rookie

    •

    6 Posts

    •

    20 Points

    3

    0

    Posted August 24th, 2026 19:00

    @dummy​ For example, this is my cable.

    1 Attachment

  • dummy

    2 Intern

    •

    108 Posts

    •

    109 Points

    4

    0

    Posted August 25th, 2026 03:34

    @dconnelly​ 

    here you go:

    CN-017RCK-FCA00-

    577-04RG-A00

    1 Attachment