I do not see a unique part number for the fin. The fin in red square is not part of the T2 graphic card holder. The fin ships with the OEM video card. But not all OEM video cards have the fin.
It's the black item in the Dell graphic above (except the fin and the power cable).
Note: The GPU End Holder only helps support GPUs with the fin attachment. That fin comes with the graphic card, as necessary...not the GPU End Holder.
I recommend the GPU End Holder, even if you don't have a GPU with a fin, because it appears to push some air directly over the two M.2 SSD slots. Also, the GPU End Holder baffles tend to force the air flow directly into the end of the GPU, rather than going around it.
What about the bottom support that we can see on the picture of the board? I was expecting some kind of plastic part on which the GPU would sit or some kind of U shape support to assist with keeping the larger GPU (2 slots wide) not to move or be only held by one screw and the pcie slot itself. Is there supposed to be something installed in there?
DELL-ChrisM2
Community Manager
•
1993 Posts
•
10000 Points
0
0
Posted October 19th, 2025 14:12
I do not see a unique part number for the fin. The fin in red square is not part of the T2 graphic card holder. The fin ships with the OEM video card. But not all OEM video cards have the fin.
OEM Nvidia RTX 4060
OEM AMD Radeon Pro W7600
OEM Nvidia RTX 5000
OEM Nvidia RTX 5060

(edited)
#IWork4Dell
