openmanage firmware compliance listing old firmware
After a firmware update, and running another compliance check, openmanage still reports the old firmware. The iDrac reports the update firmware versions. Is there a local cache that needs to be cleared on the openmanage server?
I updated 4 servers. Two showed no updates needed, after the next compliance scan. Two showed the same old firmware needing updating, while the iDracs showed the update had occurred.
For the one of these two servers, one disk drive's firmware didn't update, while the rest did (though the compliance check said none of them updated). I selected just that drive's firmware to update, and ignored the other firmware (that had actually succeeded). After updating just that one drive's firmware, all the other erroneously reports of old firmware on that server now changed to compliant.
The other server, all updates did succeed, but all still showed as non-compliant (after repeated scans).
Rebooting Openmanage, and running the compliance check again, did work. Not a great solution though, if this turns out to be a regular problem.
A reboot of Open manage did fix the problem. Not a great solution, if this is occurs too often.
I did update 4 servers. After the next compliance scan, two showed as compliant, and two showed the same firmware needing updating, even though the iDRAC showed the new versions.
One of those second two did have one update that failed. I reapplied just that one failed update, and the other non-compliant entries didn't show up in the next compliance scan.
The other server, the iDRAC always showed the firmware as non-compliant, regardless of the number of scans, until I rebooted Open manage.
OME 3.10, same issue with several servers (r740, r730, most running ESXi 7).
Rebooting the appliance, restarting appliances' services, refreshing health or hardware, rescanning compliance, refreshing baselines - none of this helps. :(
Hello There are compliance and inventory jobs that run daily They should refresh inventory and compliance If it is not happening, need to check if they are enabled, can be run manually as well It is better to have an official case with tech support so they can jump on remote and get it fixed. https://dell.to/3JzRL9X Respectfully,
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Joey C
Moderator
•
4170 Posts
•
20965 Points
1734
0
Posted July 12th, 2021 23:00
Hi,
I don't think there is any way to clear cache on OME, only a reboot of the OME VM appliance. Have you tried that?
Are you getting the same output on every server which is discovered by OME on the updates, or only this specific server.
If it's only the specific server, you try removing the server from OME and rediscover it.
DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did.