UNSOLVED

CyrilBuchsLDS

updated

2 years ago

0

1074

October 7th, 2022 06:00

Cannot monitor N-series through OpenManage Enterprise

Hello,

I've installed OpenManage Enterprise v3.9 build 55 to monitor the status of our Dell equipements. I noticed that some of our recently updated switches (N2048P: firmware 6.7.1.6 and N2024: 6.7.1.13) cannot be accessed through SNMP by OME. The error message is the following:

Message: Unable to discover the device because the protocol SNMP used for discovering this target is not supported.

Recommended actions: Enter a valid and supported protocol, and then retry the operation. For information about supported protocols, see the OpenManage Enterprise-Modular User's Guide available on the support site.

Only those 2 switches cannot be accessed by OME when running a discovery. When I try to troubleshoot using the OME tools, I can access the devices using SNMP. There is no firewall blocking the connection between them.

Do you have any idea of what is going on?

Thanks in advance!

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    620

    0

    Posted October 7th, 2022 12:00

    Hello CyrilBuchsLDS,

     

    Do you have any other N series switches that are discovered?

    I don't see them on the support matrix:

    Networking device support :

    https://dell.to/3Ck9Rcf

     

     

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    616

    0

    Posted October 7th, 2022 13:00

    Hello CyrilBuchsLDS,

     

    Can you let me know which N-Series did get discovered and firmware versions?

     

    In the mean time you can try a customized discovery for these two.

    Create customized device discovery job protocol for SNMP devices  page 57

    Specify discovery mode for creating a network switch discovery job SNMPv2 and SNMPv3 page 56

     

    Dell EMC OpenManage Enterprise 3.9 User's Guide : https://dell.to/3VaQYRB

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • 617

    0

    Posted October 7th, 2022 13:00

    Dear Charles,

    Thanks for your answer. Yes, I have 6 of them being successfully discovered. The only difference between them is the firmware versions (the 6 who are working have some old firmwares).

    Best regards.

  • 576

    0

    Posted October 14th, 2022 07:00

    Dear Charles,

    The switches I added on OME have the following firmwares:

    - 6.5.3.4 (N2048P & N4032F)
    - 4.1.0.12 (PowerConnect 5524)

    The two switches I want to add but do not work have firmwares versions 6.7.1.6 & 6.7.1.13.

    I already tried to run a customized discovery for these two devices, it does not seem to work.

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    570

    0

    Posted October 14th, 2022 13:00

    Hello CyrilBuchsLDS,

     

    This may take some more research. 

     

    I'm not sure how the older firmware switches worked without issue. They aren't listed as supported.

     

    Have you checked that the ports are open to the ones that do not get discovered?

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • 539

    0

    Posted October 17th, 2022 14:00

    I am also having this issue. I have an older firmware N1548P Switch (6.5.3.3) that is added in, but the newer firmware N1548P Switch (6.8.0.1) will not add. I will be watching this to see what the response from Dell is. All ports are open for me, discovery is working for the older firmware, so I know it's open and working.

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    537

    0

    Posted October 17th, 2022 14:00

    Not related to OME but after updating our N20xx switches they cant use with MACmon(NAC solution) anymore because SNMP was changed.

    From a OME perspective its only used the most basic SNMP function compared to OMNM for example. It makes me wonder how a vendor can mess something up which works for years.

  • 533

    0

    Posted October 17th, 2022 23:00

    Dear Charles,

    All ports are open, since I can reach and query SNMP data with the Paessler SNMP tester tool.

    @Bobby_Morren and @Origin3k, thanks for adding your experience here. I hope there will soon be a release including a correction of this annoying bug

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    526

    0

    Posted October 18th, 2022 06:00

     

    According to engineering, right now, it is functioning as designed. Those N-series switches were not designated compatible.  I understand it is working on older firmware but there is no supporting documentation for that.

     

    I have forwarded this information to L3 Engineers. Maybe there will be a fix in the next release but I have no information when that will be or if it will support N-series switches.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • 127

    0

    Posted October 19th, 2022 12:00

    Charles,

    I appreciate you forwarding this on. Any information they bring back would be helpful.

    It looks like a change in the N Series Firmware that caused the devices to not function correctly anymore, so hopefully they can shed some light on that subject and help out here.