Running an ISL at 8Gb produces lots of errors, 4Gb is error free. Don't
understand why.
We have 2 locations, separated by 610 meters and 1245 meters dark fiber. The switches are Brocade DS-300B with 8Gb long wave (10 km) SFPs.
When the switch ports run at 8Gb I see a lot of errors and communication between 2 VNX machines is very bad. Mirrorview doesn't show any progress.
When I set the ports down to 4Gb, the ISLs are error free and mirrorview is running smoothly.
The connections between the 2 300's in each fabric is a single ISL. We have 2 fabrics, so 4 switches and 2 VNX's.
We'd like to run the ISL @8Gb, but we keep getting the errors on the link. We tried new patch cables (9 micron of course) and other outlets on the patch panel, but that wasn't it.
Still no effect.The errors only dissapear when changing to normal mode (giving me 8 b2b credits) and 4Gb fixed. absolutely no errors then. when changing to 8Gb, change to LD mode (giving me 46 b2b credits) or not and even change portcfgfillword to 3, does not resolve anything. only way of error free ISL is 4Gb Normal mode. I am the colleague of RRR
This will also talk about the "Extended Fabric" license which is required, and a short chapter on "Data buffering and flow control" which might help troubleshoot.
According to your last post, we can see er_crc_good_eof in both ends:
er_crc_good_eof 58 Crc error with good eof
er_crc_good_eof 16 Crc error with good eof
So I suppose that there must be some element generating the errors in that link. The more speed the more sensitive and affected the switchs are by dust, a bad connection, sfp, etc.
Do you get these errors in both fabrics or just in one? If just in one, you can try to locate the faulty element by moving connections from one fabric to the other, with all that that implies...
dynamox
11 Legend
•
20419 Posts
•
87439 Points
2221
0
Posted February 8th, 2012 07:00
is there such a thing as buffer credits on Brocade ?