Compellent-Insights

updated

2 years ago

CI

Compellent-Insights

1 Rookie

•

2 Posts

•

2 Points

0

162

June 6th, 2024 14:47

How to properly allocate the disks for a raid?

Hey I'm having trouble rebuilding this Compellent Raid and wondering how I utilize 80% of each disk for my raid/storage.

It is showing as 0% and 0.01 allocated. I did just rebuild it so not sure if it will eventually allocate more of the drives? but I didnt see any options on how to specify this. If anyone has any step by step's that'd be highly appreciated.

  • Origin3k

    6 Operator

    •

    2424 Posts

    •

    12408 Points

    0

    2

    Posted June 6th, 2024 15:21

    Put some data on! ;)

    To check the redundancy go to StorageTypes (right click)

    A SC doesnt have a oldschool RAID setup. You simple define the level of redundancy on TIER level + Storage Profile and the software do the rest when data is comming in.

    If a rebuild of existing data is needed that you will see a "Process" tab on the upper level. Its there where you see dataprogression task also.

    Regards,
    Joerg

  • Compellent-Insights

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted June 6th, 2024 16:35

    Hey Joerg, I think it was a non-issue just a bit of confusion on my end, seems like its now growing the allocation once I start throwing some data on it as you mentioned haha.

    Only storage experience I have had is with QNAP's which is a bit more old school as you mentioned. I think its looking healthy now that i've got a volume setup via iscsi and started throwing some data on it. 

    Thanks for the insights!