Based on the errors that you are getting, it looks like your VNX systems were not decommissioned correctly. Fixing the SPS issue will not resolve the rest of the issue. You will need to fix SPS issue first. Then you will need to make sure that all enclosures are connected correctly to the correct VNX system.
Once your system is able to boot then you will need to go in and remove any registered hosts and storage groups that are no longer in use. When that is completed you should be able to register any new host to your system and assign it to storage.
I would make sure that your VNX is cabled correctly first. Once that is done, then power on the system to see what faults you have. If hardware needs to be replaced, then replace hardware as needed. Once hardware has been replaced and all faults are resolved, then you will want to remove old host that are not need and add new host.
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
0
0
Posted August 26th, 2024 16:44
Hello Ryusl,
Based on the errors that you are getting, it looks like your VNX systems were not decommissioned correctly. Fixing the SPS issue will not resolve the rest of the issue. You will need to fix SPS issue first. Then you will need to make sure that all enclosures are connected correctly to the correct VNX system.
Once your system is able to boot then you will need to go in and remove any registered hosts and storage groups that are no longer in use. When that is completed you should be able to register any new host to your system and assign it to storage.