Mirrorview is used for Block replication on the array FC or iSCSI ports - on the array. File replication uses the ethernet ports on the Data Mover and I don't believe the ports are fixed like on the array. You might want to take a look at the White Papers for File Replication - that probably explains in more detail what and how you configure the Data Movers for replication.
I'm trying to set Mirrorview/A and I see that my source system doesnt have IPs configured for Mirrorview ports that are already named A-0 (MirrorView) B-0 (MirrorView). The questions I have are:
1. I'm assuming I should configure these ports before I do "connecting storage arrays" correct?
2. When I try to assign an IP to the ports it pops up a warning "It is recommended that you consult with your Network Manager to determine the correct settings before applying these changes. Changing the port properties may disrupt iSCSI traffic to all ports on this SP. Initiator configuration changes may be necessary to regain connections"
I just wanted to know that making changes on these wouldn't affect any other ISCSI traffic?
3. Do the virtual port configuration on these IPs need to be rotatable? (The two VNX systems are in different DCs connected via L3)
I suggest that you review the Mirrorview KnowledgeBook - this should show you how to setup a mirrorview connection between two arrays - both local and remote.
kelleg
6 Operator
•
4537 Posts
3730
0
Posted August 24th, 2017 13:00
The Mirrorview ports are fixed and can not be changed. It was designed this way, this was an engineering decision.
glen