We've reinstalled some new Ciscso MDS switches in our fabric last week.
In our CX4's we had suddenly some initiators logging in which can't be found in the fcns database.
After some research it turned out that the MDS can do a scsi-target discovery using a combination of the switch vsan wwn and OS pwwn.
switch# show scsi-target pwwn
------------------------------
OS PWWN
------------------------------
WIN 24:91:00:05:30:00:2a:1e
AIX 24:92:00:05:30:00:2a:1e
SOL 24:93:00:05:30:00:2a:1e
LIN 24:94:00:05:30:00:2a:1e
HP 24:95:00:05:30:00:2a:1e
We've disbabled scsi-target discovery but we're still seeing the VSAN WWN:WIN PWWN logged in into our CX4. We're not going to use this feature, is there any other way to keep the switch from logging into the CX4.
We've had this show up in our environment a couple different times and the way I've solved it is by registering the WWNs then switching to engineering mode and deregistering them. I don't think we have had them come back for a couple years now.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
824
0
Posted October 28th, 2010 14:00
i wonder if iSCSI service running on the switch logs-in as initiator to the array, can you disable iSCSI and see if it logs out ? ( no iscsi enable)