bonnu06

updated

16 years ago

B

bonnu06

2 Intern

•

258 Posts

0

1035

June 29th, 2010 06:00

Installing Snapview Software on Existing Clariion CX4-240

Hello,

We are planning to implement Snapview software on our exisitng clariion array. I got the snapview enabler CD with me. My question here is do i need to open the Navisphere taskbar and install the Software or allow EMC CE to do it.If i need to do it by navisphere taskbar can any one guide me with the steps. Thank You.

  • Jen_LeClair

    111 Posts

    222

    0

    Posted June 29th, 2010 06:00

    You can generate User Customizable Documentation for any CLARiiON Storage System at http://www.emc.com/microsites/clariion-support/central.htm

    For your procedure choose "CLARiiON CX4" and then "Update Software".

    Answer the prompted questions and a document will be created for your step-by-step procedure.

  • kenn2347

    4 Apprentice

    •

    542 Posts

    222

    1

    Posted June 29th, 2010 06:00

    I dont have a written step by step proceedure.  Like i siad before,  the taskbar program will step you thru the process.  If it finds a problem then you cant proceed till you corrrect it.

    As for starting the proccess, these are the steps from memory:

    1    Open taskbar

    2    Click "clarrion Software Assistant"

    3     Select "Prepare for installation"  Step 1

           Complete this section.  it will analyze the array for any problem, pre-stage the software, grab SPCollects.

    4    Select Install Software.

          Select Express install.  This will finish installing the software.   It will take around 45 min if it requires a SP reboot.

    Hope this helps

  • bonnu06

    2 Intern

    •

    258 Posts

    222

    0

    Posted June 29th, 2010 06:00

    I guess we didn't pay them for installation.... i am trying to do myself. Can you please post any step by step procedure for this. So that i can mark that down.

  • kenn2347

    4 Apprentice

    •

    542 Posts

    222

    0

    Posted June 29th, 2010 06:00

    I don't see why you cant load it yourself.  The Navisphere Taskbar will step you thru the whole process.  It will check and make sure your hosts are configured for HA so everything will stay online during the process.  If i remember right, it will require a reboot of each SP so you should probably do it during low IO periods.

    Did you pay to have EMC do it for you? if so and if you are unsure about the process, then let them do it.