UNSOLVED

ankushjain1

updated

15 years ago

A

ankushjain1

10 Posts

0

451

April 16th, 2012 10:00

Can we Powercycle a slot in DAE of CX700

We have a disk stuck in Faulty state after replacement on our CX700 array which is having the latest FLARE available for that hardware.

Can we power cycle a single slot without affecting other slots on that DAE and the array?

If yes – can this be done remotely?

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    118

    0

    Posted April 16th, 2012 11:00

    You may try reseating the disk. However, if the disk has faulted after replacement, we need to check if the slot itself is faulty or not. Please, open a Service Request with SP Collects attached with EMC Technical helpdesk for further investigation.