Options? Plenty of Space on Backend but NAS uses RAID5 from FC Drives
We have plenty of space on our backend Clariion but the space is on a ATA RAID5 ( previously created and some of it allocated, do not have the option to destroy and re-create raid group).
All of the current file system were built on RAID 5 (4+1) FC disks. Other than recreating the file system completely and moving it to the ATA disks do I have any other options?
With older CX series array only (6+1) RAID 5 is supported - the (4+1) RAID 5 and (8+1) RAID 5 on ATA drives are available on newer CX3 series arrays.
However, I understand this is a Gateway connection. Which may provide you little bit more flexibility on the restriction.
I'd prefer to get in touch with your local EMC team and/or EMC Support to run it by them and verify the configuration you are planning will be EMC supported on not. They can guide you accordingly having more details on the system.
Also, you may wait for few other experts in this forum to suggest/comment.
Yes I need to expand disks on the FC side. The ATA luns were already created by someone else and I know they are probably not best practice as they should probably be RAID3. So my only option at this point is to order more FC drives on the backend? Is this correct?
Welcome to EMC Support Forum - hope you will find the forums very helpful and useful.
You mentioned all your existing file systems are on (4+1) FC Disks, but you don't have space available on the backend using FC disks - but plenty of space from ATA disks. So, is there any need to expand the existing file systems? If not, you may consider creating new file systems on the ATA disks and continue using the existing file systems on FC disks. You can have storage pools from both (4+1) FC Disks and ATA RAID 5 disks.
In fact you may plan on keeping all important or high performance data on the FC Disks and rest on ATA disks. In the long run, you may consider migrating the data from FC Disks to ATA disks if the data is better to keep on ATA drives, freeing some more space on FC Pool.
However, please follow the EMC guidelines for creating RAID groups and LUNs on ATA drives.
Hope this helps, others may suggest as well.
Looking forward to see you more and more in the forums. Cheers, Sandip
What is the model of Celerra and the DART (NAS) code you are running ? Also the model of backend CLARiiON and Flare code version?
The RAID 3 was the recommendation with CX series array earlier - however, RAID 5 is very much supported on ATA drives and now a recommendation over RAID3.
What is the RAID 5 configuration for the ATA drives? I mean how many drives are there in the raid group?
If the RAID 5 configuration on ATA drives are supported one, you may add disk space from ATA drives - create new file systems using ATA pool and then move data from few file systems using FC pool to the new file systems on ATA pool - then delete the file systems on FC pool which are already migrated. This will provide you free space on the FC pool and you may expand the other file systems on FC pool accordingly.
Request others to comment or suggest. Thanks, Sandip
nandas
6 Operator
•
1473 Posts
306
0
Posted April 23rd, 2008 15:00
However, I understand this is a Gateway connection. Which may provide you little bit more flexibility on the restriction.
I'd prefer to get in touch with your local EMC team and/or EMC Support to run it by them and verify the configuration you are planning will be EMC supported on not. They can guide you accordingly having more details on the system.
Also, you may wait for few other experts in this forum to suggest/comment.
Cheers,
Sandip