UNSOLVED

Andrey_ALexeev

updated

16 years ago

0

2636

August 27th, 2010 04:00

How to setting up backup server for sending requests to Celere by ethernet

but recieve data from Celera by FC for NDMP backup? Backup device connected to backup server.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1202

    0

    Posted August 27th, 2010 04:00

    if Celerra is not connected to your backup device directly (FC or SCSI) then you will need to look if your backup application supports 3-way NDMP backup.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1202

    0

    Posted August 27th, 2010 04:00

    Hi,

    if your tape drive is FC connected to the backup server than it's not connected to the Celerra data mover.

    In this case it's going to be heterogeneous 3-way NDMP backup where the Celerra data mover sends the backup stream over Ethernet to the backup server, which puts it onto tape.

    There isn't much to setup on the Celerra then - just the NDMP user name and password

    Please take a look at the Celerra NDMP manual.

    The rest is config on the backup server and depends on which backup application you use.

    Some are briefly explained in the Celerra manual but for more details you need to look at your backup app manuals.

    Rainer

  • 1202

    0

    Posted August 27th, 2010 04:00

    Detais:

    Backup device HP MSK6060 with 2 LTO drives directly connected to BackupExec Server (BES) by SCSI. NDMP backup setting up and working over Ethernet, it is very simple to configure. Thus all in\out data going through Ehternet link 1 Gb.

    We have one spare FC HBA and FC cable. We think to make direct FC connection from BEC to Celera and have the following data stream scheme:

    Commands from BES to Celera - Ethernet

    Data from Celera to BES - FC

    Does this scheme clear? Hope yes, sorry my english is not perfect.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1200

    0

    Posted August 27th, 2010 05:00

    Have fun

    Maybe you want to ask the question to your Veritas support .

    The Celerra expects to see a FC tape drive on its data mover port.

    If Backup Exec or Windows or some other software can provide that ….

    Powerpath sure wont

    Or in FC terms – the Celerra FC port is an initiator, the backup server port is an initiator as well – to get things works you need a target

    Rainer

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1202

    0

    Posted August 27th, 2010 05:00

    that will not work, you have to present tape devices directly to datamovers in order to move data over FC

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1202

    0

    Posted August 27th, 2010 05:00

    no - that would require your BE server to emulate a FC drive or act like a FC switch

    to the best of my knowledge no backup software does that

    if you want the data to go to the tape drive via FC you have to either put a FC card into the tape library or use a FC-SCSI bridge in between.

    Rainer

  • 1200

    0

    Posted August 27th, 2010 05:00

    Strange, EMC trainer on EMC Celera NAS course said "it is possible with PowerPath software". I just want to clarify, maybe somebody done it. If not, ok I will try to play.

  • 1200

    0

    Posted August 27th, 2010 07:00

    Hi Andrey,

    as the guys already said, you'd need to connect the tape drives to the datamover over FC, and that would be faster than passing it back to the BackupExec server for it to write to tape.

    One other option you could explore, but it would mean you couldn't use NDMP, would be to use MPFS, which would allow you to read your data directly from the backend storage array over FC.  Then you would do a LAN backup rather than NDMP.  That would lose a lot of the advantages of NDMP however so you would want to be sure you understand those and are happy not doing that.  For example if you access your data over both CIFS and NFS, NDMP would maintain both sets of permissions, but the LAN backup via CIFS would only maintain the CIFS permissions.

  • 1200

    0

    Posted September 7th, 2010 03:00

    Hi All,

    I think i was misunderstooded with technology. During last session with vendor, he said about MPFS. In this case data will be send through ethernet and recieved by FC. All that I need is having licenses, install powerpath and seting up Celera.

    What do you think about this solution?

  • 875

    1

    Posted September 7th, 2010 04:00

    Accessing a filesystem using CIFS & MPFS would usually be faster than just accessing it via CIFS, so yes backing up a filesystem from a client which uses MPFS should be faster than from a client just using CIFS.  Small random I/O wouldn't really be suitable for MPFS, but when you're doing a full backup you should see the benefits and thus speed increase.

    NDMP is the recommended way of backing up a filesystem on a Celerra, but like everything it has it's advantages and disadvantages.  There are other options, and it's down to you which suits your situation better.  Understand the advantages and disadvantages of each option, and then make your choice.