I just picked up another PERC8 Shared RAID Controller for my VRTX. I am currently running a single controller and I went ahead and powered down my VRTX and installed the second controller and now I lose my primary storage and all controllers are marked as critical in the CMC. I had to disable the second controller in order to get the primary back up and running. Under the Chassis Overview - Storage - Controllers - Troubleshooting section I did not see the section to enable Fault Tolerance. Right now the controller is disabled in order to get my primary up and running and I am wondering what I am missing here. Do I need to buy a cable or connect something up? I am just missing what I do get this working. I also see a Fault Tolerance Firmware listed for the controller. Is this needed too? I just first want to get the controllers to be in fault tolerance mode first. If anyone knows how I can accomplish that I would greatly appreciate it. Thank you.
Hello. Thank you for the information, but do you have the part number of the discontinued kit as I maybe able to find it elsewhere. I find that hard to believe that it was discontinued. Is the VRTX discontinued? There has to still be a replacement available. Any further information would be helpful. Thank you.
I would agree with ShineK to contact sales in your region for part number(s) and availability.
I am able to find two Customer Kit part numbers for upgrade but I don't know if they are discontinued part numbers or not. Sales could get you current part number.
H66M6 - CUS,KIT,SPERC8,DUAL,3.5
P1V45 - CUS,KIT,SPERC8,DUAL,2.5
DELL-Charles R
Social Media and Communities Professional Dell Technologies | Enterprise Support Services #IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
I have called Dell and have not gotten anywhere as they are not able to look up parts for parts that are discontinued. I am looking for the backplane and the cables. The part numbers you provided was the RAID Controller and not the whole upgrade kit. Can someone from the US help me out with this? I have contacted both sales and Prosupport and got bounced back and forth between them with no luck. Thank you.
Thank you for your assistance, but I called them and was on the phone for over an hour and they stated that since the part is discontinued they are not able to find it in there inventory. I was hoping someone on the forum had purchased it and had the part number of it. If anyone knows of it I would be greatly appreciated. Thank you.
dcgtechnologies
1 Rookie
•
70 Posts
3953
0
Posted November 10th, 2021 16:00
Hello,
Here is the part number. See below:
Dell 8X25K
I found it myself. Thank you.