UNSOLVED

KlasiAl

updated

5 years ago

K

KlasiAl

1 Rookie

•

4 Posts

0

1879

May 29th, 2021 17:00

m17 R4, one SSD, BIOS in RAID 0, won't recognize 2nd drive independently

Just got my 17 R4 m17 R4 yesterday.  Ordered it with a 512GB SSD.  The computer came with one SSD but the bios is set for RAID 0.  I don't want to run RAID, I just want to add additional storage space in the 2 empty slots.  I figured out how to change the bios setting w/o the OS crashing, but now the bios sees the slot #1 SSD in both slot #1 and in slot #2 simultaneously.  It does not see the 2nd different capacity SSD I added to slot 2.

How can I get this laptop to see the individual drives in slots #1 & #2?

  • crimsom

    9 Technologist

    •

    6114 Posts

    1282

    0

    Posted May 29th, 2021 18:00

    Hi @KlasiAl  your OP confusing, Subject says M17 R4, Body says 17 R4. Please click on Product Support so that Dell can check system Model and Revision for you. Thank you. 

    Why does Dell always set the BIOS to RAID 0 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • KlasiAl

    1 Rookie

    •

    4 Posts

    1274

    0

    Posted May 29th, 2021 18:00

    My laptop is an M17 R4.  

  • crimsom

    9 Technologist

    •

    6114 Posts

    1304

    0

    Posted May 29th, 2021 19:00

    Hi @KlasiAl thank you for sharing update. 

    The M.2 NVMe OS(C:) boot drive's partition format should be GPT (not MBR). 

    The BIOS boot list option should be UEFI - Enable, so that GPT can be used. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • crimsom

    9 Technologist

    •

    6114 Posts

    1268

    0

    Posted May 30th, 2021 04:00

    Dell BIOS Advanced tab, SATA Operation can be [BIOS on] or [AHCI]. @KlasiAl has not clarified if SSD is SATA or NVMe.  


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • KlasiAl

    1 Rookie

    •

    4 Posts

    1252

    0

    Posted May 30th, 2021 04:00

    Ok, so how do I get the bios to clarify between one or the other?

  • KlasiAl

    1 Rookie

    •

    4 Posts

    1257

    0

    Posted May 30th, 2021 04:00

    I've done this successfully.  The issue remains that the bios does not see a 2nd SSD.  Hence, Windows does not see a 2nd SSD.

  • ejn63

    12 Elder

    •

    31865 Posts

    •

    156340 Points

    1272

    0

    Posted May 30th, 2021 04:00

    To disable RAID and enable AHCI mode, the Windows boot setting must be changed (link below).  Once that's done, go into setup and change the Drives mode to AHCI.  That will solve the issue.

    https://superuser.com/questions/1280141/switch-raid-to-ahci-without-reinstalling-windows-10

  • crimsom

    9 Technologist

    •

    6114 Posts

    1251

    0

    Posted May 30th, 2021 04:00

    Hi @KlasiAl  thank you for sharing update. Presume you are using M.2 cards. Presume you have PCIe Gen3 x4 NVMe cards. Please give forum users a clue and look at labels on your drives. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • ejn63

    12 Elder

    •

    31865 Posts

    •

    156340 Points

    348

    0

    Posted May 30th, 2021 05:00

    The boot drive will be GPT as shipped from Dell. Do not change the system to legacy/CSM mode (assuming that's even there;  this is a recent model, so it's more likely than not UEFI-only and that option will not even be present).  Changing the system from UEFI to Legacy will mean a complete reinstall in MBR mode.

    Out of curiosity, if you remove the existing drive and install just the new one, does UEFI setup see it?

     

  • crimsom

    9 Technologist

    •

    6114 Posts

    1239

    0

    Posted May 30th, 2021 05:00

    Hi @KlasiAl  if this Windows 10 system has NVMe SSD and SATA SSD drives. BIOS set up should be:- 
    1. Boot Sequence set Boot List Option to UEFI 
    2. SATA Operation set to AHCI 
    3. Advanced Boot Option set to Enable Legacy Option ROMs 
    4. Secure Boot set to Disable 

    Please check M.2 NVMe OS(C:) boot drive's partition format is GPT (not MBR). If OS(C:) boot drive does not have GPT partition format, use Windows 10 MBR2GPT Disk Conversion Tool. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]