Installing 3 x 1TB M.2 Samsung PCiE NVME Drives in Aurora R7/8
In case anyone is interested about storage options and adding additional M2 drives in an Alienware Aurora, I just upgraded to 3 x M2 NVMe drives. My R7 is now running great with: 3 x NVME M2 drives. Anyway, just wanted to share in case anyone else wanted to go this route or know the available options.
The devices in my system are:
PCie NVMe M2 drives (all 1TB)
Samsung Evo 970 (TLC, retail version) via PCiE adapater
Samsung SM961 (MLC, OEM for 960 Evo Pro); via PCiE adapater
Samsung PM981 (TLC, OEM, similar to the 970 Evo).
Dell OEM 7200 RPM 2TB drive
Internal DVD drive
GPU - Xp
2 monitors
Some notes: the OEM samsung drives are NVMe 1.2, the retail 970 is NVMe 1.3. All drives are correctly reading at PCiE 3.0 x4. The Aurora R7 supports booting from PCiE. GPU also runs at 3.0 x8.
So, the Samsung PM981 SSD is inserted into the motherboard's provided M.2-NVMe slot ?
Also, could you post the make/model or the PCIe Addin card you used ?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Yes, samsung PM981 currently in the m2 slot on the motherboard, previously it was the sm961 but I swapped them back around July.
I got the adapters on amazon. One is a dual adapter, and also has an additional slot for a SATA ssd, which is not being used. The other just has the m2 nvme slot, same manufacturer, $5 cheaper
Are you using 3 M.2 SSDs at the same time? I ask because I also have the Aurora R8, and it came preinstalled with a 500GB, vanilla SK Hynix NVMe SSD with no mechanical drive. So I was was planning on adding the adapter you posted, an Inland 2TB NVMe SSD, and possibly an additional SSD. I know the adapter accepts 2 M.2 SSDs simultaneously, but only one will be full speed. Are you using 2 of these adapters? And if so, where did you install the second adapter to get full speed? I know of the 16x pci slot at the bottom.
Yes, I have all 3 m2 drives installed concurrently. 2 adapters, plus the m2 slot on the mobo.
Top x8 slot = GPU,
First x4 slot = covered
Second x4 slot = adapter
Second x8 slot = adapter.
You could also do top x8 adapter, first x4 adapter, second x4 open, second x 8 =GPU. Both of the Aurora's x16 slots are limited to x8 speeds so it doesn't matter speedwise. Some mobos with two x16 slots, allow the top run to run at x16, and bottom at x8, but the Aurora limits both to x8. Airflow wise, it makes more sense to have the GPU in the top slot, especially if you plan to use either of the 2.5" SATA HDD cages.
Actually, both of my adapters are only wired for x4, so connecting to x4 vs. x16/8 didn't make a difference. You can plug an x4 card into an x16 slot, the extra lanes just go unused. You just can't do it the other way around (i.e, you can't put an x16 card into an x4 slot).
In my above screen shots with the speed readings, drive C: was connected via M2, and F and G were connected via PCiE adapter. I have previously swapped C: and F: as my primary boot drive (both C: and F: are both bootable in my case) and I didn't notice an appreciable change in speed when connected via the m2 slot vs PCiE x4 adapter.
I must have missed your post somehow. So you have TLCs and MLCs in your R7? Is that from the proceeds of the Titan card sale? I know that these SSDs probably won't see the end of their natural life cycle but just out of curiosity, how are you balancing the writes and erase to the drives so that you wear them out evenly?
I must have missed your post somehow. So you have TLCs and MLCs in your R7? Is that from the proceeds of the Titan card sale? I know that these SSDs probably won't see the end of their natural life cycle but just out of curiosity, how are you balancing the writes and erase to the drives so that you wear them out evenly?
I had not really put much thought into making equal usage of the drives. (1) Samsung PM981 = boot drive, work; (2) Samsung Evo 970 = games, personal; (3) Samsung SM961, MLC = backup bootable drive, and backup images; (4) SATA drive = photos, videos. I backup image my boot drive regularly. I added the third drive to make the backup process more efficient by cutting down the size of the backup files.
I swapped the MLC drive as the primary boot drive for a short period, but ended up reassigning it back to backups. It is my "slowest" nvme drive.
I swapped the MLC drive as the primary boot drive for a short period, but ended up reassigning it back to backups. It is my "slowest" nvme drive.
I don't think about it much either, but if I am in a position to easily make it happen, I feel better having a MLC drive as bootable/OS C-Drive.
However, is seems MLC-based drives are becoming a rare-breed.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
10835
0
Posted January 28th, 2020 22:00
Nice.
So, the Samsung PM981 SSD is inserted into the motherboard's provided M.2-NVMe slot ?
Also, could you post the make/model or the PCIe Addin card you used ?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.