Aurora R8, bios update failure from 1.0.14 with Windows 11
Aurora R8 bios update failure. Mine is 1.0.14 with Windows 11 and cannot update to the most recent 1.0.30. I am experiencing Secure Boot Violation + BIOS 1.0.14. When I am trying to update the bios to the most recent one, Secure Flash Check Failure error message pops up. Chat GPT told me that my current driver is too old to be updated. Can anybody help or should I be just sticking to 1.0.14?
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. 5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Thank you so much for your help! I tried to update bios sequentially as you suggested. however, when I click 1.0.15, it redirects me to the below web page and the only available bios is the most recent one. 1.0.26 can be found from the dell webpage after googling it, but it fails to install either. I will wait for your instruction. Thank you again for your quick reply
@anne_droid For your information , 1.0.26 and 1.0.28 are available from google search but when I tried to install it , security flash check failure error message popped up.
While your Aurora-R8 is on v1.0.14 you need to correct your SecureBoot Violation condition.
You should then be able to Enable SecureBoot and enter Windows-11 normally.
If you are running BitLocker, suspend it until BIOS updates are all completed.
If you are using VBS ... Core-Isolation/Memory-Integrity should be forced-OFF until BIOS updates are all completed.
Install all missing BIOS updates in numerical consecutive order (checking computer is still working after reach one).
After you download a BIOS-Firmware updater file, go to File-Properties and un-Block it before executing it.
Good Luck. Try not the brick your motherboard.
(edited)
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
@anne_droid Oh I found it. Thank you! When I tried to install 1.0.15 after downloading it, "Error. Unable to load driver" popped up. I ran it as administrator.
as Op reported, the shown individual older bios version link does not lead to the actual old bios download site but circles back to generic R8 driver website. looks like Dell web design bug.
anne_droid
6 Operator
•
2669 Posts
•
9800 Points
0
0
Posted June 17th, 2026 09:14
Please can you confirm the Make Model and OS, along with any configuration details like touch screen, backlit keyboard, SFF or tower etc etc.
There are assorted BIOS versions...
Perhaps consider an incremental update, just update the even numbered ones?
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
(edited)
Kind Regards
anne_droid