Lousyeti98

updated

5 years ago

L

Lousyeti98

1 Rookie

•

26 Posts

0

26748

May 6th, 2020 18:00

Aurora R10, what AIO cooling will fit?

I recently bought a r10 with rtx 2080 super, 32 gigs of ram, Ryzen 9 3900x, and air cooling and shorty after use I realized how bad the air cooling option is...what AIO water coolers can I fit into my aurora r10 Ryzen? Maybe a https://www.corsair.com/us/en/Categories/Products/Liquid-Cooling/Dual-Radiator-Liquid-Coolers/Hydro-Series%E2%84%A2-H100i-RGB-PLATINUM-SE-240mm-Liquid-CPU-Cooler/p/CW-9060042-WW

  • r72019

    8 Professor

    •

    5344 Posts

    19108

    0

    Posted May 6th, 2020 22:00

    The H80i is too thick to fit in there with two fans.  Using two fans on an H75 or H60 is really tight as it is.  Both the H60 or H75 will fit, and you can use 2 fans with either AIO.  The H75 comes with 2, but you will probably only be able to use 1.  That is, you will most likely get a startup error unless you use at least one OEM or ML120 pro fan in push/pull with a Y splitter as the lead fan, or bypass it (or pull the 4th wire). 

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    19148

    0

    Posted May 6th, 2020 19:00

    you could get a Dell AIO.  MH0HN CPU liquid cooler, Aurora R6/R7/R8/R9/R10

  • Lousyeti98

    1 Rookie

    •

    26 Posts

    19136

    0

    Posted May 6th, 2020 20:00

    Thanks, would you recommend the H75 or H60? And this would fit my PC for sure? Without errors? Also would you recommend any dual fans or is single good? Sorry for all the questions I’m very new to this. One more thing, do I have a specific socket? I heard I need a AM4 socket? 

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    19134

    0

    Posted May 6th, 2020 20:00

    you have AM4 socket but Dell has designed the OEM board to have square shaped heat sink mounting holes compatible with LGA1151 socket heat sink.

  • Lousyeti98

    1 Rookie

    •

    26 Posts

    19114

    0

    Posted May 6th, 2020 21:00

    Would the H80i fit alright? Or the H75? Or the H100x these are all 120mm Corsair CPU AIO coolers BUT the H100 has dual fans and a longer radiator also if your not sure please tell me the absolute best CPU AIO water cooler I can fit into my aurora without startup issues. Thanks for the support

  • Lousyeti98

    1 Rookie

    •

    26 Posts

    19098

    0

    Posted May 6th, 2020 22:00

    Thanks so much I’m going to go ahead and buy a H75

  • 5117

    0

    Posted July 12th, 2020 14:00

    instead of a corsair aio would a thermal take 3.0 120mm fit???

  • 5108

    0

    Posted July 12th, 2020 14:00

    Thanks yea i think I'm going to give it a shot.

  • r72019

    8 Professor

    •

    5344 Posts

    5098

    0

    Posted July 12th, 2020 17:00

    @111tend111  Just one thing to consider.  You might have to remove the motherboard to install the thermaltake bracket.  The nice thing with the corsair h60/75, is the bracket and screws use the same threading as the Dell oem bracket so you don't need to replace the oem bracket (which involves disconnecting everything and uninstalling the mobo).  Nobody I know has tried the Thermaltake to check if it's the same or different.