EMC Community Network Ask the Expert conversation.For two weeks, beginning July 20th, our panel will show you how to make the most of your XtremIO system. Our panel of technical experts will share best practices of configuration, operation and management, and will be here to answer your specific questions. To get started, check out the Top 10 Tips & Tricks for XtremIO document that we featured at EMC World.
Jim is an IT Professional for over 20 years, including 15 at EMC. Strong background in UNIX system administration and NAS. Currently based in Michigan.
John prior to EMC was with NetApp for 6 years functioning as a Principal Solutions Architect focused on design and implementation of the the full NetApp solution stack supporting various applications such as Oracle, Vmware, and Microsoft. Previously, he was with a Reseller for 3 years supporting a multitude of storage and backup products including EMC, HP, Hitachi, Commvault and Netbackup.
Twitter:
@Denypatel
Global SE - EMC
Deny joined the EMC team with over 15 years of experience in Cloud Computing, Virtualization, Storage and Networking in wide variety of Pre-Sales and Engineering roles. Most recently he was with Nimble storage where he served as an Escalation Engineer helping high profile accounts resolve performance problems that were introduced by poor VDI, Network and Virtualized designed environments.
This discussion takes placefrom July 20th - August 1stAugust 7th.Get ready by bookmarking this page or signing up for e-mail notifications.
Share this event on Twitter or LinkedIn:
>> Join our Ask the Expert: Top Tips & Tricks to Rock Your XtremIO World http://bit.ly/1H4PcU8#EMCATE<<
This Ask the Expert session is now open for questions. For the next couple of weeks our Subject Matter Experts will be around to reply to your questions, comments or inquiries about our topic. Let’s make this conversation useful, respectful and entertaining for all. Enjoy!
Do all of the "Host-Side Best Practices" (HBA queue depth, Round Robin, etc) apply when a host running vSphere (Cisco UCS let's say) is zoned/connected to an XtremIO volume through VPLEX, as opposed to directly connected to an XtremIO array?
There is no performance tuning as such that you need to do on the array itself. A lot of that is already built in. Some of the high level performance data is available in the XtremIO data sheets.
Work with your XtremIO account team to discuss the workload details (r/w ratio, IO sizes, parallelism, etc) for more specific performance sizing.
Yes, this is applicable only from 4.0 release (and onwards). You should be able to see this option in the main dashboard (as a drop down list). I will try to send you a screenshot if you are not able to find it.
Is there any customer viewrable documents how to set PMI tunneling setting ? From4.0 version , there is change that management IPMI mode are no longer supported .. there is only IPMI connection via SP .( Only Support for IPMI connection via SP )
RobertoAraujo1
2 Intern
•
718 Posts
3653
0
Posted July 20th, 2015 07:00
This Ask the Expert session is now open for questions. For the next couple of weeks our Subject Matter Experts will be around to reply to your questions, comments or inquiries about our topic. Let’s make this conversation useful, respectful and entertaining for all. Enjoy!