UNSOLVED

Makuna

updated

2 years ago

M

Makuna

1 Rookie

•

3 Posts

2

1093

November 4th, 2022 10:00

XPS 17 9700 Keyboard Backlight didn't work after latest update

This is not a request for help, I am sharing the problem I hit and the solution that fixed it as I didn't specifically find it listed here.

After the latest updates this week (11/1/2022 ish), the keyboard back light no longer worked.  Hitting the F5 key that normally changes the backlight setting didn't work even though the F2 and F3 would dim and brighten the screen.

I tried lots of things and found the two postings here, one showed a screen shot showing the settings for this backlight but no description on where this screen shot came from.  The other was someone asking exactly where that screen shot comes from.  It was from the BIOS (hit F2 when booting).

So, the solution was, restart, enter bios, navigate to the keyboard settings, and even thought it showed it was enabled and set to default to DIM, I switched it to off and then back to dim.  This displayed below that one property changed and thus gave me the ability to save settings.  I then saved settings and exited (thus restarting).

Problem solved!  The F5 is working again, and my keyboard backlighting is working again.  I suspect in the update, the settings got corrupted, and these steps caused them to be corrected.

  • Cecild

    1 Message

    220

    0

    Posted April 12th, 2023 16:00

    Tried that it did not for me, do you have any other recommendations that I might try.

    Del

  • RobW72

    1 Rookie

    •

    6 Posts

    0

    1

    Posted January 2nd, 2024 06:25

    @Makuna Thank you. This process worked for me, just this morning (02JAN24) - XPS 17 9730.

    @Cecild​ - I don't know if you saved ('Apply') the changes, and then saved again after you changed the setting back? 

    What worked for me - I changed keyboard brightness (default as 'Bright'), from 'Bright' to 'Off', clicked 'Apply'; and then changed from 'Off' to 'Bright', clicked 'Apply, and then 'Exit'.

    (edited)

  • liam96

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted February 10th, 2025 13:23

    @Makuna Thanks, this worked for me after a recent update. As @RobW mentioned, I changed it from Bright to Off, clicked Apply, and then changed it from Off to Bright, and clicked Apply again.